العتبة الزاوية جيبروك جيبفريم (Saint-Gobain)

It features a 25 mm x 25 mm cross-section and is designed to reach lengths up to 3000 mm. Made from durable plastic (GDP material), it’s lightweight and designed to keep edges protected and looking sharp over time.

One continuous length can reach up to 3000 mm. For longer runs, you can join multiple lengths end-to-end and finish the seam with plaster or joint compound to create a seamless edge.

Plastic GDP corner beads are lighter, easier to install, resistant to rust, and typically more cost-effective than steel beads. They still deliver a precise 90-degree edge and maintain color without corrosion.

Ideal for plasterboard corners on walls and ceilings. It’s designed to protect edges where plasterboard sheets meet and to yield a clean, straight corner finish on large sections up to 3 meters in length.

Typical installation involves: 1) cut to length, 2) align along the plasterboard corner, 3) fix into place with appropriate adhesive or mechanical fasteners as needed, 4) bed with joint compound or plaster to embed the bead, 5) apply skim coat, sand, and paint for a smooth finish. Always follow local building guidelines.

After embedding the bead, apply joint compound or plaster to seal the edges, feather the skim to blend with the surrounding surface, allow to dry, then sand smooth and paint as required.

Yes. Wear appropriate PPE when cutting or handling; use safe cutting tools to prevent sharp-edge injuries; follow standard plastering safety procedures and local codes for handling and disposal of materials.

If you’re considering alternatives on Fepy.com, you can compare at least these options: - Gyproc Plastic Corner Bead 25x25 3000mm: https://fepy.com/product/gyproc-plastic-corner-bead-25x25-3000mm - Gypframe Corner Bead 25x25 3000mm: https://fepy.com/product/gypframe-corner-bead-25x25-3000mm Compared to the Gyproc Gypfram option, these alternatives may differ in price, finish, and ease of installation. Plastic variants generally offer similar edge protection with potentially different fit or finish characteristics.

Yes. It’s designed to be embedded with standard plasterboard joint compounds and skim coatings, delivering a flush, smooth edge suitable for painting or wallpaper once finished.

Its long reach (up to 3000 mm) reduces the number of joints on long runs, saving time and labor. The lightweight plastic design also lowers installation effort and cost, while delivering a durable, clean edge on plasterboard corners.

Yes. It’s suitable for both wall and ceiling corners, providing a consistent edge protection and straight finish across interior plasterboard applications.