قناة التثبيت و التأطير جيبروك جيبفريم (Saint-Gobain) قياس (70-I-70) طول (3000MM)

These are metal framing studs (Gyproc Gypframe) designed for wall partitions and light to moderate load-bearing applications. They come in a 3000mm length with a 70x70 cross-section and an interlocking side profile to speed up installation and improve wall rigidity when building drywall systems with gypsum boards.

Key specs include a 3000mm length, 70x70 cross-section, and an interlocking side profile that enhances alignment and structural integrity. The interlock design helps reduce mud cracks and provides solid support for gypsum boards and related drywall assemblies.

The interlocking profile makes alignment quicker and more robust, reducing the risk of gaps and vibration in the wall during installation. This leads to faster assembly, fewer sealants or adjustments needed, and a more even surface for drywall finishes.

They're ideal for load-bearing walls, partitions in drylining projects, and can be used with gypsum boards in masonry or framed walls. The 70x70 profile provides strong support and can be combined with mini profiles and other materials as part of a complete wall system.

Use cases include creating interior partition walls in offices or homes, refurbishments where a quick, robust drylining solution is needed, and projects requiring reliable load distribution along gypsum board assemblies.

Typical installation steps: plan the layout and mark reference lines, install floor and ceiling channels, insert vertical 70x70 studs by engaging the interlocking profiles, secure studs to floor/ceiling channels with appropriate fixings, ensure the frame is plumb and square, then attach gypsum boards to the studs using compatible screws. Follow local safety guidelines and use protective equipment when cutting and handling metal components.

Wear cut-resistant gloves and eye protection when handling and cutting; use proper tools for cutting to avoid sharp edges; lift with care or use assistive devices for long lengths; store components flat and protected to prevent warping; dispose of offcuts safely and follow site safety rules.

Compared with timber studs, these metal Gypframe studs are non-combustible, more uniform, and typically quicker to install with tighter tolerances, which can reduce on-site wastage and improve wall straightness. They also pair well with gypsum systems and provide consistent performance in various conditions. For alternative framing options on Fepy, you can explore other Gyproc framing products listed on the site to see how they differ in size, length, and interlock features. Example alternative options include similar 70x70 prefabricated studs and other lengths for modular drylining projects.

Alternative 1: Gyproc Gypframe 70x70 Studs 3000mm (URL: https://fepy.com/product/gyproc-gypframe-70x70-studs-3000mm) Alternative 2: Gyproc Gypframe 70x70 Studs 3000mm Interlock (URL: https://fepy.com/product/gyproc-gypframe-70x70-studs-3000mm-interlock) These pages offer similar 70x70 interlocking stud solutions that can be used in place of or with the shown product, depending on your project needs.

Consider wall type and load requirements, required fire performance, ease of installation, and surface finish goals. 70x70 studs provide stronger framework for partition walls and can support heavier gypsum board assemblies, while mini profiles are often used for lightweight dividers, tight spaces, or where a slimmer profile is preferable. Check compatibility with your chosen gypsum boards and finishing systems.

Cut with suitable metal-cutting tools and deburr edges to avoid cuts or damage to boards. When joining, ensure the interlock is fully engaged and align studs properly to maintain wall straightness. Use the recommended screws and track systems for secure attachment to floor and ceiling channels, and complete the drywall finishing steps as per standard gypsum board practices.

Yes, these 70x70 interlocking studs are designed for use in load-bearing walls along with gypsum board and compatible finishing materials. For optimal performance, ensure proper engineering assessment for the specific wall design and follow the designated installation guidelines for your project.