قناة التثبيت و التأطير الأساسية جيبروك جيبفريم (Saint-Gobain) قياس (70-SC-70) طول (3000MM)

Length: 3000 mm; Material: galvanized steel for corrosion resistance; Rating: 70SC; Used to support and brace studs in partition and dry lining systems; Lightweight and designed for easy installation.

Yes. The Gyproc Gypframe 3000MM Starter Channel is designed to support and brace both metal and timber studs within partition and dry lining installations.

Yes. The galvanized steel construction provides corrosion resistance, making it suitable for areas with higher moisture, provided the overall system is installed according to recommendations for moisture control.

It is designed to carry heavier loads when used with the appropriate Gypframe components and installation design. For exact load capacities, reference your project design and compatible stud configurations.

Typical use cases include constructing partition walls, dry lining interior walls, and forming secure wall edges in both residential and commercial projects where metal or timber studs are used.

Steps: 1) Measure and cut to length as required. 2) Position the starter channel along the wall edge or ceiling/floor line per your system design. 3) Fix the channel in place using appropriate screws/fasteners at recommended intervals. 4) Ensure the channel is level and plumb, then connect to the matching Gypframe components for the stud system. 5) Continue with the dry lining or partition assembly according to the installation guide.

Wear cut-resistant gloves and eye protection, handle edges carefully to avoid cuts, use proper cutting tools and deburring when needed, and store materials away from moisture before installation to prevent rust before use.

You can compare with these other Gypframe options available on Fepy: 1) Gyproc Gypframe 3000mm Starter Channel 70SC — https://fepy.com/product/gyproc-gypframe-3000mm-starter-channel-70sc 2) Gyproc Gypframe 6000mm Starter Channel 70SC — https://fepy.com/product/gyproc-gypframe-6000mm-starter-channel-70sc 3) Gyproc Gypframe 2000mm Starter Channel 70SC — https://fepy.com/product/gyproc-gypframe-2000mm-starter-channel-70sc

The 3000mm, 70SC starter channel offers a balance of length and load capability suitable for mid-sized walls and higher-strength requirements. Other Gypframe options on Fepy may vary in length (e.g., 2000 mm or 6000 mm) and in system ratings, so choose based on wall height, stud type, and load expectations for your project.

Key value factors include corrosion-resistant galvanization, compatibility with both metal and timber studs, a long 3000 mm length to minimize joints, and the ability to support heavier loads when paired with the right Gypframe components, leading to quicker installation and robust wall systems.

Pair it with compatible Gyproc Gypframe studs, appropriate fixing screws/anchors, and other Gypframe accessories designed for 70SC systems to complete the partition or dry lining assembly efficiently.