شفرات بديلة لسكين قاطع يدوي قابلة للفصل مقاس (9mm) متينة وحادة ضمن علبة من (10) شفرات في علبة من (10) قطع

Yes, these blades are sized for 9mm snap-off cutters and are intended to fit most standard 9mm systems. Always verify your cutter’s blade channel width and locking mechanism before use.

The product is sold as a case of 10 blades. Each blade is individually hardened for durability and long edge life.

The blades are made from high-quality steel designed to maintain a sharp edge through repeated use. The snap-off design reveals a fresh cutting edge after each segment is snapped away, delivering consistent sharpness for daily tasks.

These blades are versatile and suitable for cutting paper, cardboard, fabric, and similar materials commonly encountered in home, office, and light industrial tasks.

1) Power off or disengage the cutter. 2) Open the cutter’s blade chamber following the manufacturer’s guidance. 3) Remove the spent blade segment by snapping it off. 4) Insert the new blade edge-first into the locking slot and reseal the chamber. 5) Test cut on scrap material to ensure proper seating and alignment.

Store blades in a dry, cool place away from moisture and moisture-prone environments. Keep blades in their protective packaging until use and avoid bending or dropping to preserve edge integrity.

Always wear cut-resistant gloves or protect your hands as needed, keep fingers away from the blade edge, use a stable work surface, and snap off only the used portion in a controlled manner. Dispose of used segments safely and keep blades out of reach of children.

For alternative 9mm options on Fepy.com, you can consider the following products: https://fepy.com/product/hd-1403-snap-blades-9mm-10-pack and https://fepy.com/product/hd-1403-snap-blades-9mm-50-pack. These are similar 9mm blades designed for snap-off cutters and may offer different pack sizes or edge-life characteristics suited to your workflow.

They are designed for general-purpose daily tasks in home, office, and light industrial use. For heavier-duty industrial cutting, consider blades designed specifically for higher-stress applications and check your cutter’s load ratings and compatibility.

Key specs include: 9mm blade width, snap-off design for quick edge freshening, high-quality steel for edge retention, packaged as a case of 10 blades, suitable for paper, cardboard, fabric, and similar materials, and quick blade replacement for uninterrupted work.

Use a stable, smooth cutting surface; apply steady, even pressure; align the blade edge with the material to minimize snagging; replace the blade promptly when you notice dullness or tearing; and ensure the blade is properly seated in the cutter before cutting.