جهاز محول اللحام (Helvi) بالتيار المستمر و المتناوب (AC/DC) لانواع اللحام اليدوي و التنغستين والغاز الخامل (MMA/MIG/TIG) موديل (Compact 220)

Key specs include: 3‑in‑1 MIG/MAG, TIG, and MMA welding; max output around 220 A; single‑phase AC input; lightweight at about 7.2 kg; digital display with adjustable voltage and current; safety features like an emergency stop and protective housing; temperature sensor with automatic overload protection; EN 60974 compliance and RoHS.

The kit typically includes the Helvi Compact 220 unit, H200 MIG welding gun, earth clamp, electrode holder, and a welding mask. A user manual is usually included for setup and operation guidance.

Plug the unit into a standard 230V single-phase supply, attach the MIG gun and gas line if you’re using shielding gas, select MIG/MAG mode on the control panel, and adjust the voltage and wire feed/current to suit your material. Clean your workpieces, wear proper PPE, and begin with test welds on scrap material to dial in settings.

You can MIG weld steels and similar metals, TIG weld for thinner sections and non-ferrous materials, and MMA weld with coated electrodes. The unit’s 220 A capacity suits a range of common workshop tasks; for heavier sections, optimize travel speed and welding parameters to achieve solid joints.

Safety features include an emergency stop, a safety lock-out switch, a protective housing to contain sparks, a temperature sensor, automatic thermal overload protection, and compliance with EN 60974 and RoHS standards to support reliable, safe operation.

Compared to models with lower amperage, such as a 200 A version, the 220 A variant offers higher welding capacity while retaining the same compact 3‑in‑1 design, making it better suited for thicker materials. See similar models on Fepy for side-by-side specs: https://fepy.com/helvi-compact-200-ac-dc-mma-mig-tig-inverter-welder

If you’re exploring similar all-in-one welders, you can compare these on Fepy: Helvi Compact 180 AC/DC MMA/MIG/TIG Inverter Welder: https://fepy.com/helvi-compact-180-ac-dc-mma-mig-tig-inverter-welder; Helvi Compact 260 AC/DC MMA/MIG/TIG Inverter Welder: https://fepy.com/helvi-compact-260-ac-dc-mma-mig-tig-inverter-welder

This model is well-suited for home workshops, automotive bodywork, equipment fabrication, and light industrial tasks where a portable 3‑in‑1 welder can cover MIG, TIG, and MMA needs without carrying multiple machines.

Regular maintenance includes inspecting and cleaning the torch, replacing worn contact tips and nozzles as needed, checking cables and connectors for wear, ensuring the cooling vents are clear, and storing the unit in a dry environment. Follow the user manual for recommended service intervals.

Yes. The 3-in-1 versatility and built‑in safety features, plus a user-friendly digital display and adjustable controls, make it approachable for beginners. Start with basic MIG welds on scrap metal, then gradually explore TIG and MMA as you gain experience.

The Helvi Compact 220 provides multi‑process capability in a compact, portable package, which can offer strong value for hobbyists and small workshops needing MIG, TIG, and MMA in one unit. Value also depends on your typical tasks, consumable costs, and how often you’ll use each welding mode.