جهاز محول اللحام بالتنغستين و الغاز الخامل (Helvi) موديل (Compact 415HF)

Key specs include up to 415A output, adjustable amperage from 15–315A and voltage from 10–24V, AC/DC current modulation, IGBT technology for efficiency, a digital display for easy parameter control, a built-in silent cooling fan, and spatter reduction for cleaner welds.

Yes. The TIG inverter supports AC TIG welding, which is suitable for aluminum, with current modulation to improve arc stability and reduce spatter.

It is suitable for stainless steel and mild steel, capable of welding up to about 10 mm thickness depending on joint design and technique.

Connect to a proper single-phase power source, attach the TIG torch and ground clamp, connect shielding gas (such as argon), set AC/DC and amperage on the digital display, and begin welding. For long runs, rely on the integrated cooling fan to maintain temperature.

Wear appropriate PPE (welding helmet, gloves, jacket), ensure good ventilation, verify proper grounding, handle shielding gas cylinders safely, and keep cooling vents clear of obstructions.

The 315HF offers a lower maximum output and is typically lighter, which can improve portability in small spaces. If you don’t need the full 415A capability, you might prefer the 315HF. See the product page here: https://fepy.com/helvi-compact-315hf-tig-inverter-welder

The 420HF sits between the 315HF and the 415HF in terms of power. If you require higher current than the 315HF but are not at the 415A level, the 420HF could be a suitable option. See the product page here: https://fepy.com/helvi-compact-420hf-tig-inverter-welder

Regularly inspect electrical connections, keep cooling vents unobstructed, clean the torch and contact tip, and ensure the internal fan operates quietly. Periodic checks on cables and connectors help prevent arc loss and maintain performance.

Verify shielding gas flow is correct, ensure the tungsten is properly prepared and sharpened, clean the work surface, ensure the ground clamp has a solid connection, and confirm you’ve selected the appropriate mode (AC for aluminum, DC for most steels).

Yes. The advanced current modulation and arc control are designed to reduce spatter, resulting in cleaner welds and less post-weld grinding.