جهاز محول اللحام (Helvi) موديل (Maximig 308)

Helvi Maximig 308 Inverter Welder is a compact, portable multi‑process welding machine powered by an inverter. It supports MIG, MAG, MMA and TIG welding, allowing you to weld steel, aluminum and other compatible materials with one versatile unit. It features a 30–200 A adjustable current range, Auto Hot Start for a reliable arc ignition, Auto Arc Shut Down to stop the current at joint completion, and a 2T/4T switch for controlled continuous or spot welding. The unit also offers 9‑step voltage control and 40‑step current control for precise settings, a lightweight design with carrying handle and optional shoulder strap, protective rubber housing for durability, and integrated thermal overload protection to prevent overheating.

Key specs include a 30–200 A adjustable current range, multi‑process capability (MIG/MAG/MMA/TIG), a lightweight, portable build with a protective rubber housing, carrying handle and optional shoulder strap, Auto Hot Start, Auto Arc Shut Down, 2T/4T operation, 9‑step voltage control, 40‑step current control, and integrated thermal overload protection to ensure reliable welding performance.

The 30–200 A range and multiple processes make it suitable for a broad spectrum of materials and thicknesses. In practice, you’ll achieve good results on thin to medium thickness steels and related alloys; aluminum and other materials require appropriate process settings, shielding gas (for MIG/MAG), and wire/rod choices. Always test on scrap to dial in the best combination of voltage, current and wire for your task.

Auto Hot Start quickly ignites the arc when you pull the trigger, helping with a reliable start on dirty or painted joints. Auto Arc Shut Down stops the current when the weld is complete, reducing spatter and wear. Use Auto Hot Start for difficult starts or dirty joints, and Auto Arc Shut Down for clean transitions on long welds or when finishing a joint.

Begin with lower current and mid‑range voltage for thin materials; increase current for thicker sections and stronger welds. Use the 9‑step voltage control and 40‑step current control to fine‑tune the arc for each process. Always test on scrap first and adjust based on bead appearance, penetration and spatter.

Wear proper PPE, including a welding helmet with the correct shade, flame‑resistant clothing, gloves, and hearing protection. Ensure adequate ventilation, especially for MIG/MAG shielding gas. Ground the workpiece properly, keep flammables away, inspect cables for wear, and allow the unit to cool during extended use. Follow the manufacturer’s safety guidelines for all tasks.

Place the welder on a stable surface, connect to the appropriate power source, attach the ground clamp, and connect the welding lead and shielding gas if using MIG/MAG. Select the desired process (MIG/MAG/MMA/TIG), set an initial voltage and current, and test on scrap. Use the 2T/4T switch for continuous welding or spot welding as needed, and enable Auto Hot Start for challenging starts.

This model is well suited for DIY enthusiasts, automotive repairs, home fabrication, maintenance tasks and light production where a single compact welder can handle MIG/MAG, MMA and TIG welding without multiple machines.

Both are Helvi multi‑process inverters, but the Maximig 308 generally offers a wider current range and more adjustable controls (such as the 9‑step voltage and 40‑step current settings) for greater flexibility. See the Maximig 208 here: https://fepy.com/product/helvi-maximig-208-inverter-welder

The Maximig 508 typically provides higher output capability and build tolerance for heavier tasks, alongside similar multi‑process features. Compare features and capabilities against the 308 here: https://fepy.com/product/helvi-maximig-508-inverter-welder

Fepy offers standard return options for eligible items within the store's terms. If you’re considering a return, plan to initiate it within the specified window and ensure the product is in its original condition and packaging.