جهاز اللحام بالقوس الكهربائي (Helvi) موديل (PC 33)

It supports AC/DC welding, allowing you to work with both steel and aluminum depending on electrode selection and setup.

The welder provides up to 210 amps, enabling strong welds on material up to 1/8 inch (3.2 mm) thick.

Key features include adjustable arc force control for deeper penetration, fan-assisted cooling to reduce heat buildup, and thermal overload protection plus a protective contactor for safety and reliability.

It is described as compact and lightweight with a heavy-duty carrying handle, making it easy to carry and set up in tight or on-site locations.

Ideal for maintenance and repair, metal fabrication projects, and on-site welding tasks where a portable solution is beneficial.

Steps: 1) Connect to a suitable power source. 2) Attach the ground clamp to the workpiece. 3) Insert the electrode holder with the appropriate electrode size. 4) Select the current and adjust the arc force as needed. 5) Strike the arc and weld with a steady travel and correct angle. 6) After welding, power off, disconnect, and allow cooling.

Wear appropriate PPE (welding helmet, gloves, jacket), ensure proper ventilation, keep flammables away, monitor heat buildup, and ensure electrical safety by using a grounded outlet and inspecting cables for wear.

On Fepy.com, you’ll find comparable models such as the Helvi PC 27 Stick Welder and the Helvi PC 40 Stick Welder, which offer different current ranges and portability to suit smaller or larger jobs.

Yes. The PC 27 is typically a lower-current, more compact option for lighter projects, while the PC 40 offers higher current capacity for thicker materials and heavier workloads. These can complement the PC 33 based on your job requirements.

Yes. Its straightforward controls, combined with AC/DC capability and a portable form factor, make it approachable for beginners while still offering capability for more experienced users.

For optimal performance, pair the welder with a compatible electrode holder, ground clamp, welding cables, a suitable welding helmet, and practice electrodes appropriate for the target material.

Regularly clean the cooling vents to prevent dust buildup, inspect cables for wear, ensure proper grounding, and follow the manufacturer’s guidelines for thermal protection to maximize longevity.