جهاز القص بالبلازما (Helvi) موديل (X753)

The Helvi Plasma X753 is a portable, dual‑voltage plasma cutter designed for precise metal cutting. It offers adjustable amperage for control over cut quality, supports automatic switching between 110 V and 220 V, and includes a lightweight torch plus a ground clamp with substantial cable length for convenient operation on various job sites.

The X753 is capable of cutting various metals up to 12 mm (about 0.47 inches) thick according to the technical spec. The product overview also mentions cutting up to 3/4 inch in some wording, but for consistent results rely on the 12 mm specification. It’s suitable for many common metals such as mild steel, aluminum, and stainless steel when using the appropriate consumables and settings.

Yes. The X753 features automatic dual voltage, meaning it can be powered from either 110 V or 220 V without manual reconfiguration. The unit auto-detects your input voltage and adjusts the internal settings to let you start cutting quickly.

Included items are the lightweight plasma cutting torch and a ground clamp with 6-foot cables. This setup provides the essential components needed to start cutting right away on compatible power outlets.

For initial setup: (1) connect the power supply to a suitable outlet (110V or 220V autoselects), (2) attach the ground clamp to the workpiece, (3) connect the air supply and ensure the pressure regulator is set for clean cuts, (4) connect the torch leads, (5) power on, (6) adjust the amperage for your material thickness, and (7) initiate the arc to start cutting. Always follow PPE guidelines and ensure good ventilation.

The X753 provides an adjustable current control. Start with a mid-range setting and test on scrap metal to dial in the current for clean, precise cuts. For thinner metal use a lower amperage and for thicker sections increase the amperage gradually. Maintain a steady motion and keep the nozzle at a proper standoff from the workpiece to achieve good edge quality.

Key safety features include anti‑sparking housing, remote control options, over‑temperature and over‑current protection, and a gas/post‑flow system to ensure consistent, quality cuts. When using the X753, wear appropriate PPE (face shield, gloves, fire-resistant clothing), ensure proper ventilation, and keep a fire extinguisher nearby. Also, use the adjustable air regulator to control noise and debris.

The X753 excels at shop fabrication, automotive repairs, metal art, and DIY metal cutting tasks. It’s well-suited for producing precise, clean cuts on sheet metal, frames, brackets, and prototype parts where controlled heat input and edge quality are important.

Here are a few alternatives available on Fepy for comparison: - Lotos LTP5000D Plasma Cutter — https://fepy.com/product/lotos-ltp5000d-plasma-cutter - Mophorn 50A Plasma Cutter — https://fepy.com/product/mophorn-50a-plasma-cutter - Hypertherm Powermax 45 XP Plasma Cutter — https://fepy.com/product/hypertherm-powermax-45-xp-plasma-cutter Why you might choose one over the X753: Lotos LTP5000D is often praised for value and portability; Mophorn 50A offers a similar amperage range with potentially lower cost; Hypertherm models are typically more industrial-grade with robust support and consumables but may come at a higher price. Compare cut capacity, duty cycle, airflow setup, and included accessories to pick the best fit for your needs.

Value depends on your needs: dual‑voltage convenience, adjustable amperage for varied materials, and the included torch and ground clamp add up to a solid package for DIY and shop use. When comparing with alternatives, consider max cut thickness, duty cycle, portability, air requirements, and the cost of consumables. If you frequently switch between different power outlets or work on mixed metals, the X753’s dual‑voltage capability can be a strong value proposition.

If you’re not satisfied, you can typically take advantage of a 30‑day money‑back guarantee. This allows you to return the unit within 30 days for a refund, subject to the seller’s return terms.

Keep the torch tip and electrode clean and replace worn consumables promptly to maintain arc quality. Check air supply for consistent pressure and dryness, ensure the ground connection is secure, and inspect cables for wear. If you notice inconsistent arc striking or edge waviness, verify amperage setting, inspect the nozzle and electrodes, and confirm proper grounding and air flow before re‑trying.