جهاز محول اللحام (Helvi) موديل (Unistick 410C)

Key specs include an adjustable output range from 10 A up to 160 A, advanced inverter technology with IGBT/MOS control for precision, built‑in over‑voltage and under‑voltage protection, and a lightweight, ergonomic design for portability.

Choose your mode on the control panel: select Stick welding for electrode use, or switch to DC TIG for non‑ferrous or aluminum work. Attach the appropriate torch or electrode holder, connect the work clamp, and set the target amperage before striking an arc.

For DC TIG you’ll typically need a TIG torch, a argon shielding gas setup (regulator and hose), a suitable ground clamp, welding cables, and filler rods appropriate for the material you’re welding.

Yes. The 410C supports DC TIG welding, which enables aluminum welding with the proper TIG torch, shielding gas, and technique. Ensure you have the correct gas setup and tooling for aluminum.

It’s designed for a variety of metals, including mild steel, stainless steel, and aluminum. The adjustable 10–160 A range lets you dial in amperage for thinner sheets or thicker sections, depending on your welding technique.

Before use, inspect cables and connections, connect to a suitable power source, and ensure proper grounding. Wear appropriate PPE (helmet, gloves, jacket), work in a ventilated area, and follow standard arc‑welding safety practices. Start with lower amperage and test on scrap material to dial in settings.

Unpack the unit, connect the power supply, attach the electrode holder or TIG torch, ground clamp, and any needed hoses or cables. Power up, select the mode (Stick or DC TIG), set your amperage, and begin with practice welds on scrap pieces.

For a direct comparison, you can review the Helvi Unistick 510C Inverter Welder, which offers a higher amperage range and additional features. See: https://fepy.com/helvi-unistick-510c-inverter-welder

Yes. The Helvi Unistick 310C and Helvi Unistick 210C are also available options on Fepy and can be good comparisons for price, portability, and amperage range. See: https://fepy.com/helvi-unistick-310c-inverter-welder and https://fepy.com/helvi-unistick-210c-inverter-welder

Consider the amperage range, mode versatility (stick + DC TIG), portability, built‑in protections, and compatibility with the materials you weld most often. A balance of price, feature set, and expected service life helps determine true value.

Always wear appropriate PPE (welding helmet with proper shade, gloves, coat), ensure good ventilation, confirm proper grounding, keep a clean workspace, and follow manufacturer safety instructions for power and gas handling when doing DC TIG or stick welding.