شريط بيتوميني لاصق هنكل (Henkel) بوليبيت بيتوتاب (TS) عرض (50MM) طول (10M) و سماكة (1.5MM)

The tape measures 10 meters in length, 50mm in width, and 1.5mm in thickness.

Yes, it is designed to withstand various environmental conditions, including rain and extreme temperatures.

No, it can be applied manually without the need for special tools.

Yes, it offers good resistance to chemicals, making it suitable for use in environments where chemical exposure is possible.

While primarily used for sealing, it can also provide some thermal insulation benefits due to its bitumen composition.

Yes, it meets standards for waterproofing materials, ensuring effective sealing and protection against moisture.

Polybit Bitutape TS is a self-adhesive, cold-applied bitumen tape designed for waterproofing and sealing. It creates a waterproof membrane that adheres to various substrates to protect roofs, decks, foundations, gutters, and other surfaces from water intrusion.

The tape bonds directly to prepared surfaces without heat or flames. Its special bitumen formulation provides a waterproof seal, while its self-adhesive layer ensures a strong, durable bond even in exposed conditions.

Key specs include: self-adhesive, cold-applied waterproofing membrane; bitumen-based compound; impermeable to water; UV-resistant; abrasion-resistant; flexible to accommodate surface irregularities; suitable for both flat and sloped surfaces across various climates.

Ideal for roofing, gutters, decks, foundations, balconies, and other waterproofing/sealing needs where a durable, cold-applied membrane is advantageous.

General installation steps: 1) Clean and dry the substrate thoroughly. 2) If needed, repair any surface defects and ensure a smooth profile. 3) Unroll the tape and align it over the area to be sealed. 4) Remove the release liner gradually while pressing the tape firmly onto the surface. 5) Overlap joints by recommended amounts and apply consistent pressure to ensure full adhesion. 6) After installation, inspect seams for a uniform seal and address any air pockets. Always follow manufacturer guidelines for surface prep and overlaps.

Polybit Bitutape TS is designed for cold-applied use and can perform across a range of climates. For best results, apply within the recommended temperature range specified by the manufacturer and avoid installations in extreme freezing conditions or during rain.

The product is intended for outdoor and building-envelope use. Safety considerations include handling with proper PPE, avoiding prolonged skin contact with bitumen, and ensuring adequate ventilation when cutting or heating is involved. Store and use the tape as directed by the supplier.

Compared to similar bitumen tapes on Fepy.com, Polybit Bitutape TS offers self-adhesive, cold-applied waterproofing with good UV and environmental resistance. For an at-a-glance comparison, you can view the following alternative options on Fepy: Polybit Bitutape ST Adhesive Bitumen Tape (https://fepy.com/product/polybit-bitutape-st-adhesive-bitumen-tape) and Bitumen Tape Waterproofing 1mm (https://fepy.com/product/bitumen-tape-waterproofing-1mm). These provide similar waterproofing capabilities with varying thickness, adhesion, and flexibility to suit different substrate conditions.