بولي بيت بالبيتومين (Henkel) المعدّل عازل ضد الرطوبة غشاء بوليشيلد قياس (10MX15cm) سماكة (1.5mm)

Polyshield DPC is a polymer-modified bitumen membrane with a high-thickness, high-elasticity polyethylene film, providing enhanced durability and waterproofing capabilities.

The lifespan of Polyshield DPC can vary based on environmental conditions and proper installation. However, it is formulated to provide long-lasting damp-proofing protection.

Henkel Polybit Polyshield DPC is a modified bituminous damp proof membrane designed to prevent moisture ingress from the ground or exterior into buildings. It consists of polymer-modified bitumen laminated onto a high-density polyethylene film, providing a robust barrier against water.

Key features include its durability, economical nature, and elastomeric properties. It is designed for easy installation and can accommodate substantial movement without compromising its integrity, making it suitable for various construction applications.

The membrane should be installed during the construction of brickwork or masonry walls, laid on an even bed of mortar. It must extend through the full wall thickness and overlap by at least 100mm to ensure effective sealing against moisture.

The membrane has a thickness of 1.5 mm, a mass per unit area of 1.5 - 1.8 kg/m², and a VOC content of less than 50 g/l. These specifications ensure high performance in damp proofing applications.

Yes, Polyshield DPC is designed to perform effectively in various weather conditions. Its robust construction allows it to withstand moisture penetration, making it suitable for both horizontal and vertical applications.

The shelf life of Polyshield DPC is approximately 12 months, provided it is stored correctly in a shaded area and protected from excessive sunlight and heat. Proper storage conditions are crucial to maintaining its effectiveness.

Yes, care should be taken during application as the membrane may leave bitumen stains on skin or hands, which can be removed with light solvents. Additionally, caution is advised when using cutting tools during installation.

No primer is required to install Polyshield DPC. It can be applied directly using cement/sand mortar, simplifying installation while ensuring effective damp proofing.