Question 1

What is Henkel Polybit Polybond EP Epoxy Primer 5L and what is it used for?

Accepted Answer

Henkel Polybit Polybond EP Epoxy Primer 5L is a two-component, solvent-free epoxy primer designed to promote adhesion of subsequent coatings to a variety of substrates. It provides mechanical and chemical resistance, helping protect surfaces from moisture, chemicals and corrosion while creating a durable base for topcoats.

Question 2

Which substrates can Polybond EP Primer be applied to?

Accepted Answer

It is suitable for metals, concrete, wood and other common substrates. For best results, ensure the surface is clean, dry and free from contamination before applying.

Question 3

Is Polybond EP Epoxy Primer a two-component system, and how do I mix it?

Accepted Answer

Yes. It uses a resin and a hardener. Mix the components together according to the label directions until the blend is uniform. After mixing, use within the product’s pot life and apply within the recommended working time.

Question 4

How should I prepare the surface before applying Polybond EP Primer?

Accepted Answer

Prepare the substrate by cleaning and degreasing, removing rust or loose material, and abrading to create a mechanical key. The surface should be dry and free from contaminants before priming.

Question 5

How do I apply the primer and what technique should I use?

Accepted Answer

Apply using a brush, roller or spray to achieve a uniform coat without heavy runs. Use thin, even coats and avoid pooling. Follow recommended coat thickness and allow appropriate drying time between coats.

Question 6

What safety and compliance measures should I follow when using Polybond EP Primer?

Accepted Answer

Work in a well-ventilated area and wear appropriate PPE (gloves, eye protection, and respiratory protection as required). Avoid skin and eye contact; wash thoroughly after handling. Refer to the safety data sheet (SDS) for specific hazards, handling instructions, and disposal guidance.

Question 7

What performance benefits does Polybond EP Primer provide?

Accepted Answer

It enhances adhesion of subsequent coatings and offers strong mechanical and chemical resistance, humidity and corrosion resistance, abrasion resistance, and a durable base with a high-gloss finish that resists scratches and fading.

Question 8

Which topcoats are compatible with Polybond EP Primer?

Accepted Answer

Most epoxy or polyurethane topcoats are compatible. Always test compatibility on a small area and follow the topcoat manufacturer’s recommendations.

Question 9

What is the drying and curing timeline for this primer?

Accepted Answer

Ambient conditions influence cure. Expect tack-free times and a defined recoat window as specified on the label, with full cure times varying by temperature and humidity. Plan topcoats accordingly.

Question 10

How should I store Polybond EP Primer to maintain its quality?

Accepted Answer

Keep the product in its original container, tightly sealed, in a cool, dry place away from heat and direct sunlight. Do not freeze and follow the label’s shelf-life guidance.

Question 11

How does Polybond EP Epoxy Primer compare to the 2.5L variant on Fepy?

Accepted Answer

The 5L version is generally more cost-effective for larger projects, while the 2.5L variant provides convenience for smaller jobs. Both are solvent-free, two-component epoxy primers with similar performance. See alternatives: https://fepy.com/product/polybit-polybond-ep-primer-2-5l and https://fepy.com/product/polybit-polybond-ep-primer-5l

Question 12

What are typical use cases or applications for Polybond EP Primer?

Accepted Answer

Ideal as a base for protective coatings on metal parts, warehouse and industrial floors, structural steel components, concrete floors, and other substrates in industrial, commercial, or marine environments where adhesion, corrosion resistance and durability are important.

طلاء الأساس الإيبوكسي هنكل (Henkel) بوليبيت بوليبوند سعة (5L)

Features & Benefits

Specification

Attachments

Frequently Asked Questions