طلاء مستحلب بيتوميني بولي كوت من هينكل سعة 15 لتر

Henkel Polybit Polycoat conforms to ASTM D 1227, Type III, Class 1, ensuring it meets industry standards for quality and performance.

This product is primarily used for damproofing below-ground concrete structures above the water table, as well as serving as a moisture vapour barrier on block works and concrete surfaces prior to cladding.

Yes, Henkel Polybit Polycoat is odourless and can be safely applied in closed or confined spaces due to its non-toxic formulation.

The firm set time for the coating at 25°C is approximately 24 hours. Further coats should only be applied once the previous coat has completely dried.

The coating can be applied using a roller, brush, or airless spray. It is important to apply at a coverage rate of 1-4 m²/L per coat, depending on the desired thickness and surface porosity.

The application temperature for Henkel Polybit Polycoat ranges from 5°C to 55°C. This ensures optimal adhesion and performance during application.

This product is water-based, non-toxic, and non-flammable. It adheres well to multiple surfaces such as concrete, metal, wood, and cork, and is resistant to salts like chlorides and sulfates present in the soil.

Henkel Polybit Polycoat Cold Bitumen Emulsion is an emulsified thixotropic bitumen protective coating that dries to form a flexible black film. It serves as a protective barrier against vapour transmission and is ideal for various applications, including damp proofing and roofing systems.

While Polycoat is non-flammable and safe for indoor use, it is advisable to ensure proper ventilation during application. Additionally, users should avoid contact with skin and eyes; protective gear such as gloves and goggles is recommended.

Polycoat can be applied on damp substrates. However, the surfaces must be not waterlogged and be free from contaminants like oil or grease before application.

FEPY offers the Henkel Polybit Bituplus E4200 SBS Modified Membrane, which is a flexible and durable solution ideal for waterproofing roofs.

The firm set time for Polycoat is approximately 24 hours under standard conditions. However, drying times may vary depending on environmental factors such as temperature and humidity.

Polycoat is cold-applied, easy to use, and adheres well to multiple substrates including concrete, metal, and wood. It is water-based, non-toxic, and free from asbestos, making it safe for indoor use in confined spaces.

Polycoat is primarily used for damproofing below-ground concrete structures, protecting built-up roofing systems, and serving as a moisture vapour barrier on block works and concrete surfaces. It can also be applied in wet areas like kitchens and bathrooms.