مقبس كهربائي صناعي ثلاثي نوع ذكر قياس (32A)

A male industrial socket, like this 3-hole/pin version, is a rugged power connection designed for industrial and manufacturing environments. It provides a safe, easy way to distribute electrical power to devices such as lighting, pumps, motors, and other machinery. It uses a screw-in housing for secure mounting and is built to handle continuous current (up to 6 A) with protective features.

Key specs: 3-pin/socket configuration, rated for up to 6 amperes of continuous current, and built from brass and stainless steel. It features a screw-in housing for straightforward installation and is designed for single or multi-pole use while offering durable performance in demanding settings.

Common uses include powering lighting systems, pumps, motors, instruments, and other industrial machinery. It’s suitable for harsh or dusty environments and can be employed outdoors in locations like open-air venues, gardens, or parks where a reliable power source is needed.

General installation steps: 1) Ensure power is switched off and circuits are de-energized. 2) Mount the socket housing to a compatible surface using the provided screws. 3) Connect the conductors to the appropriate terminals inside the housing (observe polarity and tighten terminal screws firmly). 4) Secure any external wiring with strain relief to prevent movement. 5) Re-check connections, restore power, and test the connection with a low-load device before full operation.

The socket is designed to help protect users and equipment by automatically shutting off current if an overload, short circuit, overheating, or malfunction is detected. This reduces the risk of electrical fires and equipment damage, making it suitable for challenging industrial environments.

Durability comes from its brass and stainless steel construction, which resist corrosion and wear. The screw-in housing provides a secure, robust enclosure for the electrical connections, helping it withstand temperature extremes and dusty or dirty environments common in industrial settings.

For a brass 3-pin 6A male industrial socket on Fepy, you can compare at: https://fepy.com/product/male-industrial-socket-3-pin-brass-6a. It shares the same 3-pin configuration and fundamental durability, but may vary in mounting style, enclosure design, or accessory compatibility depending on the product line.

A stainless steel 3-pin 6A male industrial socket can be found at: https://fepy.com/product/male-industrial-socket-3-pin-stainless-6a. The stainless option emphasizes corrosion resistance in harsh environments, while the brass version may offer different cost or mechanical specs. Review mounting options and compatibility to choose the best match.

The male socket provides the plug-in side of the connection, while the female socket is the receptacle side. You can review a female counterpart here: https://fepy.com/product/female-industrial-socket-3-pin. When selecting, ensure compatible pin configuration, housing type, and mounting method to achieve a proper mating pair.

Consider current rating (6A for this unit), pin count (3-pin), and environmental conditions (dust, moisture, temperature). If you need higher current or different mounting, explore other variants on Fepy (for example, brass or stainless 3-pin options or different amperage offerings) to match your load and enclosure requirements.

Typically you get the male industrial socket with a screw-in housing. Depending on the installation, you may also need compatible mounting screws, wiring connectors, strain relief, a mating female socket, and appropriate enclosure or panel cutout. Always check the product page for included components and advised accessories.

Follow these practices: ensure power is off before wiring, use appropriate wire gauges for the 6A rating, securely fasten the housing, avoid exposing the connection to standing water or excessive dust, periodically inspect terminals for corrosion or looseness, and use proper PPE during installation.