كابل مرن ثلاثي من إيتالكو قياس (4MMX100Yard)

This 3-core flexible cable from Italco is designed for a variety of electrical and DIY projects. Its three cores support multiple conductors in a single run, and the copper conductors provide reliable conductivity for power transfer in both indoor and outdoor installations when permitted by local codes.

A 3-core cable has three insulated copper conductors inside one outer sheath. This is useful for wiring where you need three conductors in one cable (for example, live, neutral, and earth/ground, or for 3‑phase or dual‑voltage setups). It simplifies installation by reducing the number of separate cables you need to run.

Key specs include: 100 yards of three-core flexible cable, copper conductors for good conductivity, a flame-retardant outer sheath for safety, and a design intended for flexible installation. The product description highlights ease of installation and suitability for a range of electrical and DIY projects.

The item description mentions indoor and outdoor suitability, with a flame-retardant outer sheath for safety. For outdoor or wet/location use, verify the jacket rating and local electrical code requirements to ensure it meets your specific application and environment.

The cable is described as highly flexible, which facilitates routing around corners and through tight spaces. This reduces installation time and makes it easier to bend and thread the cable in complex layouts.

Typical steps include measuring the run, cutting to length, stripping insulation without nicking the copper cores, securing the cable with appropriate clamps or clips, and connecting to compatible terminals or connectors. Use wire strippers, cable cutters, and correct PPE. Always follow local electrical codes and ensure the power is off before working on any wiring.

The cable features a flame-retardant outer sheath and copper conductors, signaling attention to safety. Compliance depends on meeting local electrical codes and standards; check the product page for specific certifications and ensure installation follows applicable regulations.

Common use cases include wiring for DIY electrical projects, short to medium length power runs, and installations where three conductors are needed in a single sheath, such as certain lighting or appliance connections. Plan according to the voltage and current requirements of the project and ensure compatibility with your equipment.

With proper use and installation, the copper conductors can deliver reliable performance over time. Maintain by avoiding physical damage to the outer sheath, protecting from excessive heat or abrasion, and inspecting for wear periodically as part of standard electrical maintenance.

Return policies vary by retailer. Please refer to Fepy’s return policy for details on eligibility, timeframes, and conditions. If the product is unopened and in sellable condition, you may be able to return it depending on Fepy’s terms.

When comparing, consider conductor material (copper vs. alternative metals), core count, insulation and sheath ratings (flame retardant, outdoor rating), flexibility, and overall length. For direct comparisons, you can explore similar options on Fepy to see differences in price, insulation type, and environmental suitability. Example alternatives include other 3-core flexible cables from Italco or comparable brands you’ll find on Fepy’s site: https://fepy.com/product/italco-3-core-flexible-cable-100-yard and related listings. You can also search for similar cables by using: https://fepy.com/search?q=3-core+flexible+cable+italco

Terminate using appropriate terminals, lugs, or connectors rated for the cable gauge and current. Strip insulation cleanly to expose the copper conductors without nicking them, then insert into terminals and tighten to the recommended torque. Use crimp connectors or soldering as required by the connection and local electrical standards. Always test the connection with a suitable meter after installation.