Question 1

What applications is Italco 4 Core Flexible Cable best suited for?

Accepted Answer

It’s well-suited for internal wiring in conduits, flexible connections for tools and equipment, temporary or permanent installations, lighting circuits, and pathways where cable flexibility and reliable current flow are important.

Question 2

What maintenance or inspection steps are recommended for this cable?

Accepted Answer

Regularly inspect the cable for signs of wear, cracking, or insulation damage. Replace any damaged sections promptly to prevent exposure or electrical faults. Keep the cable routed away from sharp edges, heat sources, and moisture to extend its life.

Question 3

How does this cable perform in terms of durability and longevity?

Accepted Answer

The copper conductors and flexible insulation are designed for reliable, long-term performance. The high-temperature jacket and resistance to moisture and certain chemicals help sustain integrity in challenging installation conditions, contributing to a longer service life when properly installed.

Question 4

What should I check before buying to ensure I pick the right cable?

Accepted Answer

Verify that the product meets your application needs by checking conductor count (4 cores), insulation type, jacket material properties (flame retardant, water/chemical resistance), and the intended operating environment. If voltage rating or current capacity isn’t listed in the product page, look for the exact specifications on the Fepy listing or contact support for clarification.

Question 5

Are there any limitations or environments where this cable should not be used?

Accepted Answer

Avoid environments with conditions outside the jacket’s rated temperature, moisture, or chemical exposure limits. Also avoid wiring scenarios that require different conductor sizes or protective armouring unless the product variant is specifically rated for those conditions.

Question 6

What are the benefits of using a 4-core flexible cable over a standard non-flexible option?

Accepted Answer

The 4-core flexible design offers easier routing, greater maneuverability in tight spaces, and better resistance to mechanical stress during installation. This can reduce installation time and potential damage compared to rigid cables.

Question 7

How does Italco 4 Core Flexible Cable compare to other variants on Fepy?

Accepted Answer

If you’re considering alternatives on Fepy, you might compare with anArmoured variant or a PVC-flexible version to suit different environments. For example, you could look at: Italco 4 Core Flexible Cable with Armoured Sheath and Italco 4 Core PVC Flexible Cable. Check their product pages for exact specs and suitability: https://fepy.com/product/italco-4-core-flexible-cable-armoured and https://fepy.com/product/italco-4-core-pvc-flexible-cable

Question 8

What safety and compliance features does this cable offer?

Accepted Answer

The jacket is high-temperature flame retardant and designed to resist water and certain chemicals. It also features low-smoke properties to reduce toxic gas in the event of exposure. These characteristics contribute to safer installation and operation in appropriate environments.

Question 9

How do I install or use Italco 4 Core Flexible Cable safely?

Accepted Answer

Plan the run, cut to the required length, strip the insulation at the ends, and connect to compatible terminals or connectors. Route away from sharp edges and heat sources, use protective conduits where needed, and ensure proper strain relief. If in doubt, consult a licensed electrician and follow local electrical codes.

Question 10

What is the primary use of the Italco 4mm 90 Yard 4 Core Flexible Cable?

Accepted Answer

This cable is ideal for connecting various electrical appliances to a main supply, making it versatile for both residential and commercial applications.

Question 11

What are the key specifications and features of this cable?

Accepted Answer

The cable consists of 4 copper conductors with flexible insulation and a high-temperature flame-retardant jacket. It offers resistance to heat, water, and certain chemicals, along with low-smoke characteristics to minimize hazardous fumes and safer operation during installation and use.

Question 12

What is Italco 4 Core Flexible Cable and what is it used for?

Accepted Answer

Italco 4 Core Flexible Cable is a copper-based electrical wiring cable with four conductors, designed for flexible, reliable wiring in a variety of settings. It’s suitable for domestic, commercial, and light industrial applications where maneuverability and easy routing are required.

Question 13

What safety certifications does this cable have?

Accepted Answer

The cable's fire-resistant PVC insulation indicates compliance with safety standards; however, specific certification details should be checked with the manufacturer or supplier.

Question 14

How many cores does this cable have?

Accepted Answer

The Italco cable has four cores, allowing for multiple connections and enhanced functionality in various electrical setups.

Question 15

Is this cable suitable for outdoor use?

Accepted Answer

While PVC insulation provides some level of protection against environmental factors, it is recommended that specific outdoor usage conditions be verified to ensure safety and durability.

Item Name	Pvc Flexible Cable- Italco
Brand	Italco
Temperature Range	+5°C to +60°C
Voltage Range	300/500 Volts
Length	50Yard, 90Yard, 100Yard Insulation
Material	PVC
Conductor Material	Copper
Amps (A)	18A
Size	4C X 4MM X 90YRD

الكابل المرن الرباعي من (Italco) طول (90Yard) قطر (4mm)

Features & Benefits

Specification

Attachments

Customer Reviews

Frequently Asked Questions