Question 1

How does the Jaquar Click Clack Slotted Basin Waste work?

Accepted Answer

It's a press-to-close, click-clack basin waste with a slotted brass body. You press the top to open, then press again to close. The slotted drain allows water to flow while blocking larger solids, helping prevent clogging. It uses nickel‑chromium plated brass for durability and corrosion resistance and is designed to fit most standard basins.

Question 2

What materials and finishes are used in this basin waste?

Accepted Answer

The unit is made from high‑quality brass and finished with nickel and chromium plating. The finish is validated for salt spray and adhesion to ensure long‑lasting corrosion resistance in bathroom environments. It is available in multiple color/finish options.

Question 3

Will it fit my basin?

Accepted Answer

Yes. It is designed to fit most standard basins. If you’re unsure, verify compatibility by checking the basin waste size and thread type against your basin opening and fittings. The slotted design also helps with efficient drainage and clog prevention.

Question 4

What color/finish options are available?

Accepted Answer

Jaquar offers this basin waste in multiple color/finish options. The base finish is chrome with nickel accents, and other finishes may be available depending on the Jaquar range you choose.

Question 5

What are the benefits of the slotted design?

Accepted Answer

The slots allow water to drain smoothly while preventing hair and larger debris from entering the drainage system, reducing the chance of blockages. It also simplifies cleaning around the drain area.

Question 6

How do I install the basin waste?

Accepted Answer

Typical steps: 1) Turn off water supply and remove the existing waste. 2) Clean the basin hole and threads. 3) Apply plumber’s tape or sealant to the threads. 4) Screw in the Click Clack waste and tighten. 5) Apply a bead of silicone sealant around the base if needed and smooth. 6) Turn the water back on and test for leaks.

Question 7

How should I maintain and clean the basin waste to prevent blockage?

Accepted Answer

Regularly clear hair and debris from the slotted opening. Clean with mild soap and water; avoid abrasive cleaners or scouring pads that could scratch the chrome finish. Wipe dry to prevent water spots and corrosion over time.

Question 8

Is this basin waste safe for bathroom environments and compliant?

Accepted Answer

Yes. The brass construction with nickel–chromium plating provides durability and corrosion resistance. The finish is validated for salt spray and adhesion, making it suitable for use in typical bathroom settings.

Question 9

Can I replace an existing basin waste with this Jaquar Click Clack Slotted Waste?

Accepted Answer

In most cases, yes. It is designed to fit standard basin openings and fittings. Ensure the thread size and seal type match your basin. You may need to replace the gasket or seal for a proper, leak-free fit.

Question 10

How does this Jaquar basin waste compare to other options on Fepy?

Accepted Answer

Comparable options available on Fepy include: 1) Jaquar Slotted Basin Waste – Chrome Finish (https://fepy.com/jaquar-slotted-basin-waste-chrome-finish) — similar slotted design with chrome finish for a cohesive look. 2) Jaquar Pop-Up Basin Waste (https://fepy.com/jaquar-pop-up-basin-waste) — different mechanism (pop-up) but same purpose of drainage and debris protection. 3) Hindware Slotted Basin Waste (https://fepy.com/hindware-slotted-basin-waste) — another brand option with a slotted design. Each option offers different finishes and maintenance considerations, so choose based on finish, mechanism, and compatibility with your basin.

Question 11

What are good use cases for this waste?

Accepted Answer

Ideal for modern or contemporary bathrooms, especially where a sleek chrome/nickel finish is desired. It suits residential homes, guest bathrooms, and any vanity setup that benefits from a durable brass construction and easy-clean slotted drain.

Question 12

What should I check after installation if there is a leak?

Accepted Answer

Check that the threads are fully tightened and that the gasket/seal is properly seated. If needed, reseal with plumber’s tape or silicone around the base. Run water and observe for any dripping around the waste and base to ensure a proper seal.

مصفاة تصريف الأحواض جاكوار المنبثقة من النوع المشقوق موديل (ALD-BCH-729) لون (Black Chrome)

Features & Benefits

Specification

Attachments

Frequently Asked Questions