Question 1

What is the Jaquar 80 mm Height Unslotted Basin Waste and how does it work?

Accepted Answer

The Jaquar 80 mm Height Unslotted Basin Waste is a brass basin waste designed to fit standard basins with an 80 mm drain hole. The unslotted design means there is no overflow slot, making it suitable for basins that do not require an overflow channel. It provides a durable, leak-resistant seal when closed.

Question 2

What materials and finishes are used in this basin waste?

Accepted Answer

It is made from brass and features a high-quality nickel-plated finish of 10.0 microns and chromium plating of 0.3 microns. The finish is designed to resist corrosion, and the product has been salt-spray tested for 500 hours with adhesion validated to ensure long-lasting performance.

Question 3

What does the 80 mm size refer to, and will it fit my basin?

Accepted Answer

The 80 mm size refers to the standard drain hole diameter the waste is designed to fit. It is compatible with basins that have an 80 mm waste hole. The unslotted design is ideal for basins without overflow channels.

Question 4

What color or finish options are available for this basin waste?

Accepted Answer

The Jaquar Basin Waste is offered in multiple color/finish options, in addition to the nickel-chromium plated look, to coordinate with various faucet and fittings in your bathroom.

Question 5

How do I install the Jaquar 80 mm Height Unslotted Basin Waste?

Accepted Answer

Typical installation involves removing any existing waste, cleaning the drain hole, applying appropriate sealant or plumber’s putty around the flange, inserting the waste into the drain hole from above, and securing from underneath with the mounting hardware. After installation, check for leaks by running water into the basin and tightening any connections if needed.

Question 6

What’s the difference between unslotted and slotted basin wastes, and when should I choose unslotted?

Accepted Answer

Unslotted basin wastes do not have an overflow slot, which is suitable for basins without an overflow feature or where overflow is not required. Slotted wastes include an overflow slot to help prevent water from spilling over in case the basin overfills. Choose unslotted if your basin design and plumbing configuration don’t require overflow protection.

Question 7

Is this basin waste durable in high-use bathrooms and humid conditions?

Accepted Answer

Yes. The brass construction with nickel and chromium plating is designed for durability, corrosion resistance, and long service life. The product’s finish has been tested for resistance to salt spray for 500 hours and validated for adhesion, making it suitable for regular bathroom use.

Question 8

How should I maintain and clean this basin waste to keep its finish looking good?

Accepted Answer

Clean with mild soap and water and dry with a soft cloth. Avoid abrasive cleaners, acidic/alkaline harsh chemicals, or steel wool that could scratch the finish. Regular cleaning helps preserve the finish and prevent buildup that could affect performance.

Question 9

What safety and compliance features does this basin waste have?

Accepted Answer

The waste uses brass with a durable nickel-chrome plating. Its finish has been tested for corrosion resistance and adhesion, including a 500-hour salt-spray test, which indicates durability in humid bathroom environments and compliance with common durability standards.

Question 10

How does this Jaquar basin waste compare with other Jaquar options on Fepy?

Accepted Answer

Jaquar offers multiple basin waste variants. For example: Jaquar 80 mm Height Slotted Basin Waste (https://fepy.com/jaquar-80mm-height-slotted-basin-waste) provides an overflow slot for basins that require it; Jaquar 60 mm Height Unslotted Basin Waste (https://fepy.com/jaquar-60mm-height-unslotted-basin-waste) fits basins with a 60 mm drain hole and no overflow slot; Jaquar 60 mm Height Slotted Basin Waste (https://fepy.com/jaquar-60mm-height-slotted-basin-waste) offers a similar build with an overflow slot. If your basin uses an 80 mm hole and no overflow, the 80 mm Height Unslotted option is a direct match.

Question 11

What should I measure before buying to ensure it fits my basin?

Accepted Answer

Measure the basin’s drain hole diameter (ensure it is 80 mm for this model), confirm there is no overflow requirement for an unslotted design, and check that the installation depth and mounting hardware will fit below your basin and countertop setup.

Question 12

Are there any common installation pitfalls I should avoid with this basin waste?

Accepted Answer

Avoid overtightening the mounting nut, which can damage threads or the washer. Ensure the drain hole is clean and free of debris before installing, and use an appropriate sealant or plumbers putty to prevent leaks. If you are unsure about alignment, consult a qualified plumber for a proper seal and fit.

مصفاة تصريف الأحواض جاكوار قياس (80mm) من النوع غير المشقوق موديل (ALD-BLM-705) باللون (Black Matt)

Features & Benefits

Specification

Attachments

Frequently Asked Questions