مصفاة تصريف الأحواض جاكوار قياس (80mm) من النوع المشقوق موديل (ALD-WHM-709) لون (White Matt)

The body is brass, chosen for durability, and it features nickel-chromium plating to enhance aesthetics and resist corrosion. It’s tested for long-term durability and designed for modern bathroom environments.

The waste is 80 mm in diameter, intended for basins with an 80 mm drain hole. Before purchasing, measure your basin’s drain opening to ensure a proper fit and check that the basin supports a slotted 80 mm waste.

The slots allow water to flow through quickly while helping trap hair and larger debris at the surface, reducing the chance of debris entering the drainage system and causing blockages.

Jaquar offers this 80 mm slotted basin waste in multiple colors to match or contrast with your basin and fixtures. Availability of specific colors may vary by retailer or stock.

Basic steps: remove the old waste, clean the mounting surface, apply plumber’s putty or sealant around the thread, insert the new waste, hand-tighten the mounting nut, connect the tailpiece, and test for leaks. If you’re unsure, a professional plumber can complete the installation to ensure a watertight seal.

Typically you’ll receive the 80 mm slotted brass basin waste, a mounting nut, rubber washers or seals, and the tailpiece. Some variants may include additional securing hardware depending on the finish.

It’s designed for 80 mm drain holes and works with most basins that accept an 80 mm slotted waste. It’s a Jaquar-branded component, but its 80 mm size makes it broadly compatible with many 80 mm basins and compatible plumbing fittings.

Clean with mild soap and water or a non-abrasive bathroom cleaner. Avoid acidic or abrasive cleaners that can dull the finish. Wipe dry after cleaning to prevent water spots, and periodically check seals for any signs of wear.

The brass construction with nickel-chrome plating provides durability and corrosion resistance. The 500-hour salt spray testing (as noted in product specs) indicates robust protective finishes suitable for bathroom environments. Proper installation is important to prevent leaks.

An 80 mm waste generally supports larger drainage openings and can offer faster drainage on basins designed for 80 mm. A 63 mm waste is for smaller drain holes and basins designed for that size. Check your basin’s drain hole diameter and compatibility to determine the best fit for your setup.

Yes. If you’re considering different finishes or a similar 80 mm option, you can explore the following comparable products on Fepy: Jaquar 80mm Slotted Basin Waste – Satin Chrome: https://fepy.com/product/jaquar-80mm-slotted-basin-waste-satin-chrome and Hindware 80mm Slotted Basin Waste: https://fepy.com/product/hindware-80mm-slotted-basin-waste