Question 1

What exactly is the JE1069A Full Body Safety Harness and what is it designed to do?

Accepted Answer

The JE1069A is a full-body fall-arrest harness designed for climbing and fall protection. It features 45mm polyester webbing, a dorsal D-ring for attachment, a high-strength polyethylene back plate, adjustable chest and thigh straps, a sit strap for comfort, and a sturdy plastic buckle. The setup is built to handle load demands with a minimum breaking strength of 25kN.

Question 2

What are the main technical specs I should know about JE1069A?

Accepted Answer

Key specs include: 45mm polyester webbing, minimum breaking strength of 25kN, dorsal attachment D-ring, back plate with high resistance, adjustable chest and thigh straps (three points each), an ideally positioned sit strap for comfort, and green/black color with a plastic buckle for quick donning and adjustment.

Question 3

How do I properly wear and adjust the JE1069A harness?

Accepted Answer

To wear it: inspect for damage, loosen all straps, slip into the harness with the D-ring on your back, fasten the chest and thigh buckles, then tighten the chest and thigh straps until the fit is snug but comfortable. Check the sit strap sits correctly under you, and ensure the D-ring remains centered on your back. Finally, connect your lanyard to the D-ring and verify all adjustments are secure.

Question 4

What are typical use cases for this full-body safety harness?

Accepted Answer

It’s suitable for climbing activities and any job requiring fall protection, such as rope access, construction, maintenance at height, industrial tasks, and other scenarios where fall arrest equipment is needed.

Question 5

How should I inspect and maintain the JE1069A to stay safe over time?

Accepted Answer

Perform a pre-use inspection every time you wear it: check for frayed or damaged webbing, bent or cracked buckles, misaligned D-ring, and wear on the back plate or pads. Clean with mild soap and water if needed, air-dry away from direct heat, and store in a cool, dry place. If you notice any damage or excessive wear, replace the harness.

Question 6

How does JE1069A compare to other full-body harnesses available on Fepy?

Accepted Answer

JE1069A emphasizes comfort and strength with 45mm webbing, a back-plate design, and adjustable triple-point chest and thigh straps, plus a sit strap for all-day wear. When exploring alternatives on Fepy, you’ll find options with similar safety features but varying webbing widths, back-plate designs, or buckle types. For a quick side-by-side view, you can explore related options on Fepy’s safety harness category or search results to compare features and prices.

Question 7

Where can I find similar harness options on Fepy to compare with JE1069A?

Accepted Answer

You can browse similar options on Fepy via these pages: https://fepy.com/search?q=safety+harness and https://fepy.com/category/full-body-safety-harnesses. These pages show multiple harnesses with comparable specs and help you compare features, prices, and availability directly on Fepy.

Question 8

What sizing or fit considerations should I keep in mind for JE1069A?

Accepted Answer

JE1069A uses adjustable chest and thigh straps with a sit strap, designed to fit a range of body sizes. For the best fit, adjust each point for snug, secure contact without restricting movement, ensure the D-ring sits centered on your back, and verify that the sit strap provides comfortable support during extended wear.

Question 9

Are there important safety and usage notes I should know before using JE1069A?

Accepted Answer

Yes. Remember that the harness is designed for fall arrest and requires proper attachment to a compliant anchor point and a compatible lanyard. Ensure the D-ring is clean and free of distortion, check straps and buckles for wear, and never modify the harness. Always anchor to a rated point and avoid damp or damaged environments that could degrade webbing or components.

Question 10

Why might JE1069A be a good value choice compared with other harnesses on Fepy?

Accepted Answer

JE1069A combines durability, comfort features (like the sit strap and back-plate design), and a robust 25kN minimum breaking strength at a competitive price point. If you’re weighing options, consider what you value most—comfort for long wear, strength for higher load scenarios, or ease of use with quick-adjust buckles—and compare those aspects across similar Fepy harnesses to determine overall value.

حزام الأمان لكامل الجسم (JECH) المصنوع من البوليستر مع حلقة على شكل حرف (D) باللون (Green/Black) موديل (JE1069A)

Features & Benefits

Specification

Attachments

Frequently Asked Questions