حبل أمان قصير (JECH) من النوع (Y) مقاس (45mm) قابل للتوسيع مع خطاف فولاذي

Key specs include: material – polyester; adjustable length – 1380 mm to 1800 mm; energy absorber width – 45 mm; energy absorber expansion in a fall – up to 3700 mm (depends on configuration); hardware – two forged steel scaffold hooks and one steel snap hook; intended for vertical work with fall protection.

Steps: 1) Inspect the lanyard for damage before use. 2) Attach the forged steel scaffold hooks to appropriate anchor points. 3) Connect the steel snap hook to the safety harness or anchor as required. 4) Adjust the length to your working range (1380–1800 mm). 5) Ensure the energy absorber is unobstructed and the system is secured before starting work. In the event of a fall, the absorber will deploy to reduce impact; after deployment, replace the lanyard with a new one.

It's suitable for vertical work scenarios such as construction, maintenance, warehouse tasks, and other high-work environments where fall protection is required. Use it in combination with a compatible safety harness and approved anchor points.

Maintenance tips: wipe with a damp cloth to remove dirt; air-dry completely before storage; avoid exposure to extreme heat, chemicals, or direct sunlight for extended periods; inspect for fraying, cuts, or damaged hardware before each use; do not machine wash or submerge in solvents; store in a dry, cool place away from sharp objects.

Always inspect the entire system before use. Do not use if the fabric, hardware, or energy absorber shows signs of damage. Use only with compatible harnesses and anchor points designed for fall protection. Do not exceed recommended working lengths or misalign anchors, and replace the lanyard after a fall or any deployment of the energy absorber.

Compared to other Y-type 45mm lanyards, this model emphasizes a robust steel hardware set (two forged steel scaffold hooks and a steel snap hook), an adjustable 1380–1800 mm length, and a 45 mm energy absorber. For broader choices:

If you’re not satisfied, you can initiate a return within the standard window (subject to Fepy’s posted terms) provided the item is in its original condition and packaging. Please refer to the site’s return guidelines for eligibility, timeframes, and steps to return.

The package includes two forged steel scaffold hooks and one steel snap hook attached to the polyester lanyard. You’ll need a compatible safety harness and approved anchor points to complete the fall-protection setup.

The lanyard is designed to work with standard safety harnesses that have D-ring attachments. Always verify compatibility with your specific harness model and anchor points and ensure the connection points match the lanyard hardware.

Use the adjustable range (1380–1800 mm) to match your working reach while keeping slack to a minimum. Consider ceiling height, task travel distance, and anchor point location to avoid excessive elongation or entanglement.

It should be used with approved anchor points designed for fall protection. Avoid placing undue stress on non-rated or unstable anchors. Always follow your site’s safety plan and local regulations.

A 45 mm energy absorber offers a compact, lighter profile with controlled energy absorption during a fall. Different widths can affect flexibility, compatibility with certain connectors, and the overall fall-arrest performance. Check product specs and choose based on your harness and anchor system requirements.