مركب الملء و الحشو سهل التطبيق (stucco) من جوتن سعة (4L)

It can repair masonry, stucco, brick, and concrete surfaces. It’s suitable for both indoor and outdoor use and can handle holes and cracks from impact as well as everyday wear.

Prep the surface by cleaning loose material and ensuring it’s sound and dry. Apply with a trowel or dispensing gun, pressing the filler into the hole and smoothing the edge. For deeper repairs, apply in layers, allowing each coat to set before adding the next.

It dries in a low to medium dry time and cures to a semi-hard, durable finish. It can be used in temperatures up to 40°C. For holes deeper than 25 mm, apply in multiple coats and allow adequate drying between coats.

Yes. It’s formulated for both indoor and outdoor use, providing strong adhesion and flexibility suitable for various climates and weather exposure.

It dries to a semi-hard finish that is suitable for subsequent coatings with compatible paints or finishes after full cure. For the best results, follow the coating manufacturer’s recommendations once the filler is fully cured.

Jotun Stucco Filler offers superior adhesion to masonry, stucco, brick, and concrete surfaces. Surface should be clean, sound, and free of loose material; in most cases priming isn’t required, but test adhesion on unfamiliar substrates.

The product is non-toxic, and cleanup is easy with water if done before it sets. Use in a well-ventilated area, wear basic protective gear as needed, and keep away from children once mixed until fully cured.

Common uses include patching small cracks, filling holes from impact, and repairing joints or damaged areas on stucco, brick, masonry, and concrete surfaces—both interior and exterior.

For similar repairs, you can compare with these alternatives available on Fepy: Jotun Masonry Repair Filler (https://fepy.com/products/jotun-masonry-repair-filler), Jotun Stucco Patch (https://fepy.com/products/jotun-stucco-patch), and Jotun Concrete/Brick Repair Mortar (https://fepy.com/products/jotun-concrete-brick-repair-mortar). They offer related repair options with different textures, adhesion profiles, and drying times.

Key considerations include its suitability for indoor/outdoor use, ability to fill holes up to and beyond 25 mm in depth with layered applications, low water content for stronger adhesion, and a finish that dries semi-hard for subsequent coatings. It can be used with trowel or gun application and tolerates temperatures up to 40°C.

Store the unopened container in a cool, dry place away from moisture and direct sunlight. Keep the container tightly closed when not in use and follow any label guidelines forShelf life and reuse. Once opened, use within the time recommended on the product label to ensure best performance.