دهان الأساس المستحلب الاكريليكي من جوتن سعة (18L)

This primer offers excellent penetration into substrates, providing superior adhesion and protection against alkali attacks. It is also resistant to algae and fungus, ensuring long-lasting performance in various environments.

The primer can be applied using a roller or brush for corners and edges, while airless or conventional spray methods are also suitable. The nozzle tip should be between 0.021–0.027 inches with a spray angle of 65–80 degrees.

Drying times vary based on temperature and humidity. At 23 °C and 50% relative humidity, it becomes touch dry in about 3 hours, hard dry in 5 hours, and can be over-coated after a minimum of 3 hours.

The VOC content is theoretical and varies based on testing conditions. However, it is designed to meet safety standards and has low VOC emissions, contributing to better indoor air quality.

The surface must be sound, clean, dry, and free from dust, oil, or grease. A light sanding is recommended to ensure proper adhesion and any loose particles should be removed before applying the primer.

The primer should be stored in a cool, dry place away from heat sources. Containers must remain tightly closed to prevent contamination and maintain product integrity.

Yes, Jotun Acrylic Emulsion Primer can be diluted with water up to a maximum of 40%. Proper dilution helps achieve the desired consistency for application without compromising performance.

It is an alkali-resistant primer designed for exterior surfaces, providing excellent adhesion and protection against alkali attack. It can also be used on interior surfaces like cement plaster, concrete, and blockwork.

The primer offers superior alkali resistance, inhibits algae and fungus growth, and ensures excellent adhesion to substrates. It is based on acrylic copolymer emulsion for durability and long-lasting performance.

It is ideal for cement plaster, concrete, blockwork, and rendered surfaces. The substrate must be clean, dry, and free from dust, oil, or grease before application.

The primer can be applied using a roller or spray (airless or conventional). A light sanding of the surface is recommended before application to ensure optimal adhesion.

The product comes in an 18L container with a weight of 26.3 kg. It provides ample coverage for large exterior areas.

Yes, it resists alkali damage and prevents algae and fungus growth, making it suitable for outdoor applications under harsh conditions.

It has a solids volume of 37 ± 2%, a specific gravity of 1.54 (white colour), and complies with VOC standards for environmental safety.