جوتن ديوروسان أكشن غير اللامع (Base A) سعة (18L)

Cement plaster, concrete, blockwork, and rendered surfaces.

1 L, 4 L, 10 L, and 20 L.

White and all interior colours in the Jotun Multicolor system.

Dry film thickness: 20-25 µm; Wet film thickness: 50-70 µm.

Theoretical spreading rate: 20-16 m²/l.

Dilute with water at 50-60% ratio.

Substrate temperature: minimum 10°C and at least 3°C above the dew point; good ventilation.

Drying times (assuming 50% relative humidity): 10°C: Surface (touch) dry in 12 hours, Hard dry in 16 hours, Dry to next coat in 12 hours. 23°C: Surface (touch) dry in 4 hours, Hard dry in 8 hours, Dry to next coat in 4 hours. 40°C: Surface (touch) dry in 2 hours, Hard dry in 4 hours, Dry to next coat in 2 hours.

The surface must be sound, clean, dry, and free from dust, oil, grease. Light sanding is recommended.

Use a PVA Primer (I) before applying the paint.

Two coats are recommended; an additional coat may be needed for bright, dark, or significant colour changes.

Refer to the drying timetable for the minimum recoating time.

Clean tools with water.

Store in a cool, dry, well-ventilated space away from heat and ignition sources; keep containers tightly closed.