دهان جوتن إيزي كوت للأسطح الخارجية (9918) غير اللامع سعة (18L)

It is ideal for decorating exterior surfaces like cement plaster, concrete, blockwork, and rendered surfaces.

It comes in 18L, 16.2L, and 16L sizes on FEPY.

It is available in White and other colors in the Jotun Multicolor system.

It can be applied using a roller (recommended), spray (airless or conventional), or brush (for corners and edges).

The recommended film thickness per coat is 30 - 40 µm dry film thickness and 80 - 118 µm wet film thickness.

The theoretical spreading rate is 11.5 - 8.5 m²/l, depending on factors like film thickness and surface texture.

It can be thinned up to a maximum of 10% with water.

Ideal conditions for applying include a substrate temperature of minimum 10°C and at least 3°C above dew point, with good ventilation.

10°C: Surface (touch) dry in 6 hours, Hard dry in 12 hours, Dry to over coat in 6 hours 23°C: Surface (touch) dry in 3 hours, Hard dry in 6 hours, Dry to over coat in 4 hours 40°C: Surface (touch) dry in 1 hour, Hard dry in 2 hours, Dry to over coat in 2 hours

The surface must be sound, clean, dry, and free from dust, oil, grease, etc. Light sanding with a suitable abrasive material is recommended.

Use Jotashield Alkali Resistant Primer or Acrylic Emulsion Primer (1 coat) for most surfaces and Jotashield Penetrating Primer (1 coat) for porous and chalky surfaces.

Two coats are recommended.

Store away from heat and ignition sources in a dry, cool, well-ventilated space. Keep containers tightly closed.

Benefits include easy application, durability, good hiding power, water resistance, and low VOC.