دهان ديكور جوتن إيزي كوت للأسطح الخارجية

This product is suitable for application on concrete and cement plaster surfaces. It is essential that the substrate is clean, dry, and free from defects such as cracks or undulations prior to application to ensure optimal adhesion and finish.

The recommended application method for Jotun Easycoat Profile Decor 3MM is using a nylon or steel trowel. The thickness of the applied coat can vary, but it typically ranges from 0.6 to 0.8 m² per liter, depending on the texture and surface conditions.

Drying times for Jotun Easycoat Profile Decor 3MM vary based on environmental conditions. Under ideal conditions (23°C and 70% humidity), it takes approximately 4 hours to become surface dry and up to 24 hours before recoating is possible.

The paint has a solid content of 76 ± 2 volume% and a specific gravity of approximately 1.95 for the white color variant. It also has a low VOC content of 11 g/l, making it a more environmentally friendly option compared to traditional paints.

Jotun Easycoat Profile Decor 3MM should be stored in a cool, well-ventilated place, protected from heat and direct sunlight. Containers must be kept tightly closed when not in use to maintain product integrity.

Yes, it is advised to use this product in well-ventilated areas and avoid skin contact. In case of spillage on skin, it should be washed off immediately with soap and water. Eye contact requires immediate flushing with water and medical attention.

The theoretical spreading rate for Jotun Easycoat Profile Decor 3MM ranges from 0.6 to 0.8 m² per liter, depending on factors like film thickness and surface porosity. Actual coverage may vary based on application technique and surface conditions.