دهان جوتن فينوماستيك بيتي ناعم حريري (1924) سعة (1L)

It is suitable for interior and exterior walls, including plaster, brick, and painted surfaces. For bare or very porous surfaces, proper surface preparation and priming are recommended to achieve the best finish.

Prep the surface: clean, repair, and sand as needed. Stir the paint well before use. Apply with a quality brush or roller (or spray if you’re experienced). For best results, apply two coats, allowing adequate drying time between coats. Ensure good ventilation during application.

Typically two coats are recommended. The approximate coverage is 10–14 square meters per liter, depending on surface porosity and texture. Areas with high porosity may require more paint.

The Silk finish is designed to be durable and easier to clean. It resists dirt buildup and moisture better than some standard finishes and maintains color brightness with good fade resistance over time.

Yes, it is suitable for indoor use. It is water‑based and formulated to have low VOC content, contributing to a more comfortable indoor environment with less odor during application.

Yes, this paint can be tinted to a wide range of colors using Jotun’s tinting system. Availability of colors depends on the tinting facility, so check with your Fepy retailer for color options and compatibility.

Measure the wall area (length × height minus openings). Use the product’s coverage rate (about 10–14 m² per liter) and multiply by the number of coats (usually 2). Round up to account for porosity and waste, and consider buying a little extra for touch-ups.

For bare, porous, or severely stained surfaces, priming is recommended to ensure adhesion and finish quality. For well‑prepared, previously painted surfaces in good condition, you can often apply directly after cleaning and light abrading.

Clean with mild soap and warm water. Avoid abrasive scrubs. The finish is designed to resist dirt; touch up or recoat if you notice dulling or obvious wear over time.

Store in a cool, dry place in the original container, with the lid tightly closed. Keep out of reach of children and pets. Do not pour leftover paint down drains; follow local regulations for disposal or recycling of containers and contents.

If you’re considering other Fenomastic finishes, you can compare these on Fepy.com: Jotun Fenomastic My Home Smooth Silk 1924 in a different size (2.5L) at https://fepy.com/product/jotun-fenomastic-myhome-smooth-silk-1924-2-5l and Jotun Fenomastic My Home Satin 1924 1L at https://fepy.com/product/jotun-fenomastic-myhome-satin-1924-1l. The Silk finish offers a smooth, reflective sheen with durable hiding power, while Satin typically has a slightly glossier look with similar durability; choose based on sheen preference and room lighting.