دهان مينا جوتن فينوماستيك ألوان ناصعة اللامع (02) سعة (4L)

This enamel gloss is versatile for interior walls, exterior walls, and various prepared substrates such as wood, plaster, masonry, and metal where a durable gloss finish is needed. Proper surface preparation is important for best adhesion and longevity.

Key features include: Monaliza 02 finish, 4L capacity, low VOC formulation, good dirt and grease resistance, UV resistance for outdoor use, easy cleaning, and strong colour retention. It provides a glossy, smooth finish ideal for high-traffic areas.

Coverage depends on substrate and porosity, but typically you can expect around 10–12 m² per litre per coat. For a 4L can, that translates to roughly 40–48 m² per coat, assuming even, primed surfaces. Actual coverage may vary by surface texture and application technique.

Typically 1–2 coats are recommended for best colour and durability. Allow the first coat to dry to the touch (approximately 2–4 hours, depending on temperature and humidity) and recoat after about 16–24 hours. Full curing can take several days depending on conditions.

Start with a clean, dry surface. Remove dust, grease, and loose paint. Sand glossy surfaces to a dull finish to improve adhesion. For bare or stained surfaces, apply a compatible primer. Ensure the surface is free of moisture before painting.

Stir thoroughly before use. Use a quality brush for edges and corners and a roller for flat areas to achieve a smooth film. Apply thin, even coats rather than thick ones. If thinning is required, follow the product guidance and use compatible thinning agents. Allow proper drying between coats and avoid working in extreme temperatures or high humidity.

Work in a well-ventilated area and wear appropriate PPE such as gloves and safety glasses. Keep away from heat sources and open flames. The paint has low VOC content for safer indoor use, but always follow the safety data sheet (SDS) and regional regulations for storage and disposal.

Priming is recommended on bare wood, metal, or highly porous surfaces, and when painting over very glossy or chalky coatings. For previously painted surfaces, scuff-sand to improve adhesion, and use a compatible primer if required by the substrate or existing coating.

Compared to alternative enamel gloss finishes on Fepy, Fenomastic Pure Colours Enamel Gloss 02 4L offers a Monaliza 02 finish with long-lasting colour protection and strong UV resistance. For a direct look at similarities and differences, you can review similar options on Fepy here: - Jotun Fenomastic Pure Colours Enamel Gloss 02 1L: https://fepy.com/product/jotun-fenomastic-pure-colours-enamel-gloss-02-1l - Jotun Fenomastic Pure Colours Enamel Gloss Al Monaliza 01 4L: https://fepy.com/product/jotun-fenomastic-pure-colours-enamel-gloss-al-monaliza-01-4l - Jotun Fenomastic Pure Colours Enamel Satin 02 4L: https://fepy.com/product/jotun-fenomastic-pure-colours-enamel-satin-02-4l

Use cases include living rooms, hallways, kitchens, bathrooms, exterior façades, doors, trims, and even furniture where a glossy, washable finish is desired. It’s suitable for areas prone to dirt and wear, thanks to its durable surface and ease of cleaning.

Maintain the finish by cleaning with mild detergent and water; avoid abrasive scrubbers that could dull the gloss. Touch up or recoat as needed after signs of wear or color fading, following the same preparation steps as the initial application to ensure good adhesion.