Jotun Jotashield Colourlast Matt, 18L 1876, Used for Rich Warm Exterior Highlights

It's suitable for exterior and interior walls, masonry, and primed surfaces. For best results on very smooth or challenging substrates, follow surface preparation guidelines and prime as needed.

Key benefits include durable weather protection, fade resistance under sunlight, dirt-repellent finish for easier cleaning, mould/mildew resistance in humid areas, and low VOC/low odour ingredients for safer indoor use.

Prepare the surface (clean, repair cracks, sand any rough areas). If repainting over old, poorly bonded paint, abrade and ensure a sound surface. Stir thoroughly, use a compatible brush or roller, and apply at least two coats. Allow each coat to dry before applying the next.

Drying times depend on temperature and humidity. Typically, the first coat dries to the touch within a few hours, and a second coat can be applied after the recommended recoat time specified on the can. Ensure adequate ventilation during drying.

Coverage varies with surface texture and porosity. For an accurate figure, check the product label on the can and plan for multiple coats as needed based on the surface condition.

Since it’s water-based, you can clean brushes, rollers, and applicators with warm soapy water until they’re clean.

Yes. It features low VOC and low odour characteristics, making it suitable for indoor use with proper ventilation during application and curing.

Ideal for exterior walls that need UV protection and mould resistance, as well as interior spaces with humidity or staining concerns where a durable, easy-to-clean matte finish is desired.

For a direct comparison, you can review similar exterior matt options on Fepy, such as Dulux Weathershield Exterior Matt 18L (https://fepy.com/product/dulux-weathershield-exterior-matt-18l) and Berger WeatherCoat Exterior Matt 20L (https://fepy.com/product/berger-weathercoat-exterior-matt-20l). These alternatives offer comparable weather protection and finish, but performance can vary by substrate, climate, and maintenance needs.

Mixing finishes or using incompatible primers can affect performance. If you’re touching up, use compatible primers and the same product line or consult product guidelines to ensure consistent colour and finish.

Regular light cleaning with a mild soap solution helps remove dirt and grime. Address any stains or mould promptly, and if needed, recoat every few years depending on exposure and wear to maintain a fresh look.