مشبك تثبيت الخراطيم (Jubilee) قياس (2 3/4" -3 1/2")

It fits hoses with an inner diameter of 2 3/4 inches up to 3 1/2 inches.

It is made from corrosion-resistant material, providing durable performance in harsh environments such as automotive, industrial, and marine applications.

Open the clip, position it around the hose, align the ends, then tighten the screw with a screwdriver or nut driver until snug. Ensure the hose sits evenly inside the band and avoid overtightening.

If you need to adjust, loosen the screw, reposition the clamp on the hose, then re-tighten until secure.

Common uses include automotive hoses, industrial equipment connections, and marine hose lines where a secure, adjustable clamp is needed.

Yes, it is designed to withstand vibration and higher pressures typical in automotive, industrial, and marine settings.

The clip is made from corrosion-resistant material. Verify compatibility with your specific fluids and hoses and comply with local safety standards for your application.

It’s built to be durable and long-lasting in harsh environments. Regularly inspect for signs of wear or corrosion and replace if damaged.

A stainless Jubilee version typically offers enhanced corrosion resistance for harsher environments while maintaining the same size range. Example: https://fepy.com/product/jubilee-hose-clip-stainless-2-3-4-3-1-2

Other stainless clamps may differ in drive type, adjustability, and size ranges. Choose based on torque requirements, hose material, and environment. Example: https://fepy.com/product/stainless-hose-clamp-2-3-4-3-1-2

Measure the hose inner diameter, confirm that 2 3/4 to 3 1/2 inches is within range, and note the 4 inch band length. Also consider installation access and environment to ensure compatibility.