قرص قطع الماسي توربو (K2) قياس (4")

The K2 Turbo 4" Diamond Cutting Disc is a professional-grade blade designed to cut hard materials quickly and smoothly. It’s suitable for cutting stone, concrete, brick, and metal when used with an angle grinder, thanks to its turbo design that increases cutting speed.

Key specs include a 4-inch diameter, a turbo K2 design for faster cuts, and a diamond cutting edge. It’s built for heat resistance to help prevent overheating during extended use and is intended for use with angle grinders.

This disc is designed to handle hard materials such as stone, concrete, brick, and metal, making it versatile for masonry, demolition, and metalworking tasks when paired with the appropriate grinder.

Compared to other 4" discs on Fepy, the K2 Turbo 4" is optimized for faster cuts with its turbo design and is built to be heat resistant for longer cutting sessions. For alternatives, you can explore similarly sized options like the K2 4.5" Turbo Diamond Disc (https://fepy.com/product/k2-turbo-4-5in-diamond-cutting-disc) and the Duratec 4" Turbo Diamond Disc (https://fepy.com/product/duratec-4in-turbo-diamond-disc) to weigh slight differences in performance and price.

Install the disc on a compatible angle grinder with the grinder powered off. Align the disc with the grinder’s arbor, tighten the mounting nut securely, and ensure the grinder guard is in place. Use steady, controlled movements and let the turbo design do the cutting work. Always follow your grinder’s manual for mounting specifics.

Wear eye protection, hearing protection, and gloves. Use a dust mask or respirator when cutting to reduce inhalation of dust. Ensure good ventilation, secure the workpiece, and avoid forcing the tool. Check the disc for cracks or damage before use and replace if any defects are found.

Yes, the disc is designed to cut metal as well as other hard materials. When cutting metal, ensure you’re using the appropriate guard and avoid overheating by using a steady feed rate and allowing pauses to cool the disc as needed.

Diamond discs wear with use. If you notice decreased cutting speed, glazing, chipping, cracks, or a visibly worn edge, it’s time to replace the disc to maintain safety and performance.

Yes. The K2 Turbo 4" Diamond Cutting Disc is described as a professional-grade tool designed for hard materials and extended use, making it a good choice for construction, masonry, and metalworking professionals.

Work at a steady pace, avoid stalling the cut, and use proper ventilation. If you notice excessive heat, take short breaks to cool the disc and the grinder, and ensure you’re using the correct grinding technique and speed for the material.

The K2 Turbo 4" offers a balance of speed, heat resistance, and durability for cutting hard materials. If you frequently cut stone, concrete, brick, and metal, its turbo design can save time and improve efficiency, which can translate to better value over time compared to slower or less durable discs.