براغي كناوف الإسفينية قياس (6X40MM) المكونة من (200) برغي

Knauf Wedge Anchor 6x40mm is a masonry anchor designed to secure fixtures into solid concrete and masonry substrates. When installed, the wedge expands inside the drilled hole to grip the material, providing a strong, vibration-resistant hold for items like shelves, brackets, electrical boxes, and lighting fixtures.

Diameter: 6 mm; embedment length around 40 mm. Box count: 200 anchors per box. Material: steel with zinc plating for corrosion resistance. These specs make it suitable for secure mounting in solid masonry and concrete.

200 Knauf wedge anchors are included per box.

1) Drill a hole in the masonry with a bit matching the anchor diameter. 2) Clean out the hole to remove dust and debris. 3) Insert the wedge anchor into the hole until the head sits flush with the surface. 4) Tighten the bolt to seat the anchor and expand the sleeve inside the hole. 5) Do not over-tighten to avoid damaging the anchor or substrate.

This anchor is intended for solid masonry and concrete substrates. It is not recommended for hollow blocks, aerated concrete, or damaged/cracked concrete unless specifically rated for those substrates.

Consider the fixture weight, the required embedment depth, and the substrate type. For heavy loads or deeper mounting, a longer embedment or a larger diameter anchor may be needed. Always follow the fixture’s load requirements and refer to the product datasheet for recommended sizes.

Wear appropriate PPE (eye protection, gloves), use the correct drill bit and depth, and ensure the substrate is sound and free of damage. Do not install in damaged or crumbling concrete, and use the correct anchor size for the fixture. Check for hidden utilities before drilling.

The 6x50mm variant offers a longer embedment, which can provide greater pull-out resistance in the same substrate and allow for deeper mounting of fixtures. If you need more anchorage depth, the 6x50mm is a suitable alternative. See product page: https://fepy.com/product/knauf-wedge-anchor-6x50mm

The 8x40mm variant uses the same embedment length but with a larger diameter, which can increase load capacity and grip in solid masonry. Choose 8x40mm if you require higher load-bearing capacity or if your fixture mounting requires a larger anchor.

Common use cases include mounting shelves and brackets to concrete walls, securing electrical boxes or panels to masonry, attaching lighting fixtures, and fixing handrails or other fixtures that require a strong, vibration-resistant mount into solid masonry.

Yes, the Knauf Wedge Anchor 6x40mm set is sold as a complete package with the fixing bolt included for installation.

This item can be returned or exchanged under the seller’s standard term for returns while ensuring the product remains unused and in original packaging. Please refer to the seller’s return guidelines for eligibility and timeframes.