شفرة منشار ماكيتا الترددية (792148-9) رقم (23) تحتوي من (9) أسنان في البوصة مكونة من (5) قطع

These blades are optimized for softwood up to about 90 mm thick, plywood up to around 60 mm, and plastics up to about 100 mm. They’re designed to deliver fast, aggressive cuts in wood while still offering smoother performance on plastics.

Key features include symmetrical head geometry with a centering tip for stable starts, milled and side-set teeth for rougher, aggressive cuts, and a lightweight overall design to reduce user fatigue during extended use.

These blades are compatible with Makita JR3000 series reciprocating saws, including JR3050T, JR3060T, and JR3070CT, ensuring a secure fit and optimal performance.

1) Ensure the tool is unplugged or the battery is removed. 2) Release the blade clamp and insert the blade so the teeth face the cutting direction. 3) Secure the blade fully and test for any wobble before starting. 4) Start at a slow speed to confirm it bites cleanly, then proceed with normal cutting pressure.

High carbon steel (HCS) blades offer good durability and sharpness for clean cuts in wood and plastics, with a balance between cutting speed and blade life suitable for frequent replacements in wood-cutting tasks.

Yes. Always wear eye protection and gloves, secure the workpiece with clamps, avoid twisting or forcing the blade, and keep hands away from the blade during operation. Regularly inspect blades for chips or dull teeth and replace as needed.

Blades should be replaced when you notice diminished cutting speed, visible dulling, chipped teeth, or increased resistance. Inspect blades between uses and replace as needed to maintain clean cuts and safe operation.

Compared to other 9 TPI wood-cutting blades on Fepy, this Makita set emphasizes a balanced 9 TPI for speed and smoothness, with a specialized head geometry for stable starts and aggressive cutting. For similar options from other brands, you can browse: https://fepy.com/search?q=Makita+JR3000+series+reciprocating+saw+blade

9 TPI offers a middle ground—faster cuts with reasonable smoothness. Higher TPI (e.g., 10–14) gives smoother cuts but slower material removal, while lower TPI (e.g., 6–8) cuts faster but rougher surfaces. Choose 9 TPI for general wood and mixed tasks where you want a good balance.

You can view other 9 TPI wood-cutting blades on Fepy here: https://fepy.com/search?q=reciprocating+saw+blade+wood+9+tpi