قرص القص ماكيتا قياس (355mm) سماكة (3mm) بفتحة تثبيت (25.4mm) موديل (A87672)

This is a heavy‑duty 355 mm cut‑off wheel designed for cutting metal and steel on compatible 355 mm grinders. It is suited for construction, fabrication, and other demanding metalworking tasks where fast, consistent cuts are needed.

Diameter: 355 mm. Thickness: 3 mm. Arbor (bore): 25.4 mm.

It is optimized for metal and steel cutting, delivering durable performance on tough ferrous materials while maintaining good cut quality.

1) Unplug the tool and remove the guard if needed. 2) Inspect the wheel for cracks or damage. 3) Align the wheel with a 25.4 mm arbor on the grinder. 4) Use the correct flange washers and tighten the wheel nut to the recommended torque. 5) Reinstall the guard and check for smooth rotation with no runout. 6) Wear proper PPE and perform a light test run before cutting.

Maintain a steady, even feed without side loading, avoid applying excessive pressure, and limit heat buildup. Let the wheel do the cutting work and, if needed, pause to allow cooling during longer cuts to prevent glazing or heat damage.

Always wear eye protection, hearing protection, gloves, and a proper face shield. Ensure the grinder’s guard is in place, secure the workpiece, avoid loose clothing or jewelry, and keep sparks away from flammable materials.

The wheel is designed for long life under heavy use, with a heat‑resistant design to help maintain performance. Its lifespan depends on material being cut, feed rate, tool speed, and cooling; avoiding overheating will extend wheel life.

Store in a dry, stable environment away from impacts. Keep it in its original packaging or a dedicated wheel rack, and inspect for any cracks or damage before reusing.

This wheel emphasizes durability, heat resistance, and reduced vibration for smoother, longer-lasting cuts. Other 355 mm wheels on Fepy may prioritize factors such as price, cut speed, or hardness; choose based on your material, tool compatibility, and desired balance of life and cost.

- Makita A-87673 Cut-off Wheel 355 x 3 x 25.4mm A36P Steel — https://fepy.com/products/makita-a-87673-cut-off-wheel-355-x-3-x-25-4mm-a36p-steel - Bosch 355 x 3 x 25.4 mm Cut-off Wheel — https://fepy.com/products/bosch-355-cut-off-wheel-355-x-3-x-25-4mm - DeWalt 355 x 3 x 25.4 mm Cut-off Wheel — https://fepy.com/products/dewalt-355-cut-off-wheel-355-x-3-x-25-4mm

Yes. It’s well-suited for metal fabrication, metal frame construction, automotive repair tasks involving sheet or structural steel, and any project requiring robust, precise cuts on ferrous metals with reliable wheel life.

If you’re cutting metal or steel with a 355 mm grinder and need a durable wheel with stable cuts and a 25.4 mm arbor, this Makita wheel is a strong match. Compare it against other 355 mm options on Fepy by weighing durability, heat resistance, vibration, and cost against your specific materials and tool compatibility.