رأس راوتر دوار للتشذيب السطحي من ماكيتا (D-12239) مقاس (6mm) و طول قطع (25.4mm) و قطر قطع (9.5mm)

Cutting diameter: 9.5 mm; Cutting length: 25.4 mm; Shank diameter: 6 mm; Bearing-guided design for guided trimming; built for durability and smooth operation.

unplug the router, insert the bit into a 6 mm collet, and tighten the collet securely. Set a shallow cutting depth initially so only the bearing engages. Align the bearing with your template and gradually feed the workpiece for a consistent pass, keeping the bearing riding along the template.

Best suited for wood, plywood, laminate, and veneer. It’s not recommended for metals or non-wood materials. Ensure the work surface is stable and clamped before trimming.

Keep the cutting edges clean and free of resin buildup, sharpen or replace when worn, and store the bit in its protective case to prevent damage. Avoid overheating by using appropriate feed rates and multiple shallow passes when needed.

Wear eye and hearing protection, secure the workpiece, unplug the router before changing bits, use push blocks or mafts to keep hands away, and maintain a firm, controlled feed to prevent kickback.

Pattern copying and edge finishing along templates, flush trimming laminate or veneer to match profiles, and shaping edges to achieve clean, precise results on wood-based materials.

Compared to similar flush trim bits on Fepy, this Makita D-12239 offers a bearing-guided design for accurate template following, a 6 mm shank for broad router compatibility, and durable construction. Alternatives on Fepy include: 1) Makita D-12238 Flush Trim Router Bit (9.5 mm x 25.4 mm, 6 mm shank): https://fepy.com/product/makita-d-12238-flush-trim-router-bit-9-5mm-x-25-4mm-6mm-shank 2) Makita D-12239B Flush Trim Router Bit (9.5 mm x 25.4 mm, 6 mm shank, bearing): https://fepy.com/product/makita-d-12239b-flush-trim-router-bit-9-5mm-x-25-4mm-6mm-shank-bearing

Start with a shallow pass and gradually increase depth in 1–2 mm increments per pass. Let the bearing follow the template and avoid taking deep cuts in one pass to minimize tear-out and vibration. Slow, steady feed with consistent pressure yields the cleanest edge.

Yes. The bearing guides the bit along the template, making it suitable for both straight and curved edge trimming and pattern copying when used with an appropriate template.

Yes. Makita is a trusted brand, and the D-12239 provides precise trimming, durable build, and compatibility with most 6 mm shank routers. It’s well-suited for professional use where clean, repeatable edge finishes are needed.