المنشار الدائري اللاسلكي ماكيتا قياس (165MM) ببطارية (5AH) أمبير موديل (DHS680RTJ)

The 165mm blade allows a cutting depth of up to 57mm at 90 degrees and supports bevel cuts from 0° to 45°, enabling versatile straight and angled cuts for wood, plywood, and MDF.

A brushless motor provides higher efficiency, longer run time per charge, reduced maintenance, and longer tool life compared with brushed models.

The RTJ kit typically includes an 18V 5Ah battery and a charger. The larger 5Ah battery delivers longer work time between charges, helping you finish bigger tasks without frequent recharging.

Use the tool-less blade change system: release the blade guard, lift the blade clamp, swap in a compatible 165mm blade, tighten the clamp, and re-seat the guard before use.

To adjust depth, loosen the depth mechanism and set the base plate so the blade sits up to 57mm deep at 90°. For bevels, loosen the bevel adjustment screw and tilt the base plate to between 0° and 45°, then re-tighten.

It includes a blade guard, soft-grip handle for secure control, an integrated LED light for visibility, a sawdust blower to keep the cut line clear, and a dust extraction port for connecting a vacuum.

It's designed for wood, plywood, and MDF. With the 165mm blade and precise depth/bevel controls, you can achieve clean, straight cuts suitable for framing, cabinetry, and general carpentry.

If you’re weighing options, you can compare to the Makita DHS681Z bare tool at https://fepy.com/product/makita-dhs681z (tool-only). For a similar older model, see https://fepy.com/product/makita-dhs660. For a tool-only variant of the same family, you can check https://fepy.com/product/makita-dhs680z.

Consider depth and bevel requirements, runtime with the 5Ah battery, and whether you want a kit (battery/charger) included. The brushless motor, LED work light, dust management, and cordless convenience offer strong value for professional or serious DIY use.

Keep blades sharp, clean debris from the blade guard area, store with the battery removed when not in use if possible, and periodically check screws and the blade clamp for tightness to maintain optimal performance.