منشار ماكيتا اللاسلكي ببطارية ليثيوم أيون (18V) قياس (100mm) بدون بطارية أو شاحن (DUC101Z)

Key specs include: 18V LXT battery compatibility (battery and charger not included), 100mm (4") guide bar, brushless motor, automatic chain lubrication, tool‑less chain tensioning, weight around 1.6–2.0 kg (varies with battery), chain speed of 8.0 m/s (480 m/min), chain oil capacity of 55 mL, sound pressure around 79 dB(A), lock‑off lever, rear hand guard, and a movable guard for deeper cuts.

Regular maintenance includes keeping the chain properly tensioned with the tool‑less adjustment system, ensuring the oil reservoir is filled so the chain stays lubricated, cleaning the bar and chain after use, and inspecting the blade/chain for wear or dullness. Always disconnect the battery before maintenance and use only Makita replacement parts to maintain performance.

This pruning saw is ideal for pruning small to medium branches on trees and shrubs, trimming hedges, pruning fruit trees, and working in tight spaces where a larger cordless saw would be cumbersome.

Install a compatible Makita 18V LXT battery, attach the 100mm blade/chain, and ensure the chain tension is correct with the tool‑less adjustment. Fill the oil reservoir and make sure the guard is in place. Press the lock‑off lever, grip firmly with both hands, and begin cutting with steady, controlled motions. Always cut away from your body and keep hands clear of the chain.

Safety features include a lock‑off lever to prevent accidental starts, a rear hand guard, and a movable guard that adjusts as you cut deeper. For personal protection, wear safety glasses or a face shield, cut‑resistant gloves, hearing protection, and sturdy clothing and footwear. Keep bystanders away and follow proper operating procedures.

For similar Makita cordless pruning saws on Fepy.com, you can check these options to compare features, bar length, and price: Makita DUC353Z and Makita DUC254Z. See: https://fepy.com/search?q=Makita%20DUC353Z and https://fepy.com/search?q=Makita%20DUC254Z

Yes. The DUC101Z is designed to be compatible with Makita 18V LXT Li‑Ion batteries. Note that this listing is for the tool only, so battery and charger are not included and must be purchased separately if you don’t already own them.

Runtime depends on the battery capacity and cutting conditions. With a typical 4–5 Ah battery, you should be able to perform several pruning cuts on light to medium branches before recharging. Heavier, tougher cuts will reduce runtime. Using a higher‑capacity battery will extend runtime, while lighter work will extend it.

Locate the oil reservoir and open the cap to fill up to the recommended oil level (the unit uses a 55 mL oil capacity). Refill as needed to maintain proper lubrication during pruning. Wipe away any excess oil and ensure the cap is secured before use.

Store in a dry, well‑ventilated place away from moisture and debris. Remove the battery when storing and keep the blade/chain guarded. Clean the exterior after use to remove sap, resin, and dust, and inspect for any signs of wear before the next use.

The DUC101Z offers cordless convenience with a brushless motor, efficient lubrication, tool‑less adjustments, and compatibility with Makita’s 18V LXT ecosystem. Since battery and charger are sold separately, consider the total cost of the tool plus the battery, charger, and oil when evaluating value against other cordless pruning saws on Fepy. If you already own Makita 18V LXT batteries, it can be a particularly good value.