المنشار الدائري الميتري ماكيتا قياس (14") استطاعة (1380W) موديل (LS1440)

The Makita LS1440 combines a 14" blade capacity with a powerful 1380W motor, dual miter/bevel adjustments, a built-in laser guide, and a dust collection system. Its lightweight 15.5 kg design, ergonomic soft-grip handle, and positive-stop adjustments help deliver accurate, clean cross cuts and compound miter cuts with less fatigue.

Key specs include a 14" blade capacity, 1380W motor, dual miter angle adjustments, bevel adjustment (left and right), built-in laser guide, dust collection bag, ergonomic soft-grip handle, adjustable cutting depth, and a heavy-duty construction designed for professional use.

First, mount the saw securely and install a sharp 14" blade. Power on the saw and center the laser over the cutting line. Use test cuts on scrap wood to verify alignment, then fine-tune the laser position if needed so the laser line matches the blade path across your typical cuts.

It's designed for woodworking tasks and handles common lumber types, plywood, laminates, and other wood-based materials. The 14" blade capacity and robust motor empower you to tackle larger pieces with precision.

The saw provides left and right miter angle adjustments plus quick, easy-to-use positive stops for frequent angles. Set your desired miter angle using the angle scale, lock it in with the lock lever, and repeat for the opposite side as needed for complex cuts.

Engage the bevel adjustment, tilt the blade to the desired angle (left or right), and lock the bevel position. Use the bevel scale to set your angle precisely, then proceed with your cut while keeping the workpiece securely clamped.

Always wear eye and ear protection, keep hands away from the blade, use clamps to secure workpieces, and ensure the blade guard is in place. Disconnect power before changing blades or adjusting components, and maintain a clean work area to prevent slips or misfeeds.

Attach the included dust bag to the saw’s dust port and connect it to a suitable vacuum or collection system if available. Regularly empty the bag and inspect the dust port for obstructions to maintain efficient dust collection during cuts.

The description mentions a built-in dust collection system (dust bag). For enhanced versatility, you may want to pair the saw with compatible 14" wood-cutting blades and a stand or benchtop mounting solution, which are commonly available separately on Fepy.

Compared with Makita LS1040 (10-inch) on Fepy, the LS1440 offers a larger 14-inch blade for bigger pieces and a higher cutting capacity, but the LS1040 may be lighter and cheaper for smaller work. Compared with Bosch GCM12SD (12-inch Glide), the LS1440 uses a traditional fence and internal laser vs. a glide mechanism; if you need glide action for smoother cross-cuts, Bosch may be more suitable. Compared with DeWalt DWS780 (12-inch), the LS1440 provides Makita reliability with similar bevel/miter capabilities but differs in motor power and blade size. For a different brand option, Hitachi C10FCE2 (10-inch) offers a more compact setup, but with a smaller blade and capacity. See the following product pages for direct comparisons: https://fepy.com/product/makita-ls1040-10-inch-miter-saw, https://fepy.com/product/bosch-gcm12sd-12-inch-miter-saw, https://fepy.com/product/dewalt-dws780-12-inch-miter-saw, https://fepy.com/product/hitachi-c10fce2-10-inch-miter-saw

Begin by securing the saw on a sturdy bench or stand, install a sharp 14" blade, and ensure the fence is square to the blade. Calibrate the laser if needed, set your miter and bevel angles, clamp the workpiece, and perform a test cut before proceeding with your project.

Regularly inspect and tighten the fence and miter/bevel locking mechanisms, verify that the blade remains square to the fence, recalibrate the laser alignment as needed, and perform periodic checks on blade runout. Cleaning the dust port and dust bag helps maintain cutting performance.