لقم مثقاب ماكيتا (SDS Plus) المقواة بالكربيد قياس (14) طول (160mm) موديل (D-00262)

Diameter: 14 mm; Length: 160 mm; Shank: SDS Plus; Tip: Carbide-tipped; Designed for concrete, masonry, and stone; Built for high-impact rotary hammer use.

SDS Plus shank is a quick-release, secure-fit system used by many rotary hammers. It allows rapid bit changes, better energy transfer, and reduced bit slippage, making the bit compatible with a wide range of SDS Plus tools.

Ideal for professional drilling tasks such as creating large-diameter holes for anchor bolts, rebar, or plumbing in concrete, brick, stone, and other hard masonry materials. Its long length supports deep holes where reach matters.

1) Ensure the tool is powered off and unplugged. 2) Insert the bit into the SDS Plus chuck until it seats securely. 3) Set the hammer to drill mode (not hammer-only for steady drilling). 4) Begin drilling at a moderate speed with steady, axial pressure, and withdraw intermittently to clear dust. 5) Avoid side loading to prevent bit breakage.

Use steady, axial pressure and avoid forcing the bit. Let the bit cut at its own pace, withdraw occasionally to clear debris, and keep the workpiece cool and dry. The carbide tip and flute design are optimized for durable, long-lasting performance in hard materials.

Always wear eye protection and a dust mask, use hearing protection if needed, secure the workpiece, check the bit for cracks or damage before use, and ensure the tool is switched off before changing bits. Avoid overheating by drilling in short intervals if the material is particularly dense.

Compared to other 14x160 SDS-Plus bits on Fepy, this Makita D-00262 emphasizes carbide-tipped durability and an optimized flute design for efficient dust removal and heat management. Alternatives from other brands may offer similar size and shank, but different tip materials, coatings, or flute geometries, which can affect drilling speed and lifespan. For direct comparisons, you can review the Makita D-00263 SDS-Plus Drill Bit 14mm x 160mm, Bosch SDS Plus Drill Bit 14mm x 160mm, and DeWalt SDS Plus Drill Bit 14mm x 160mm on Fepy: - Makita D-00263: https://fepy.com/product/makita-d-00263-sds-plus-drill-bit-14mm-160mm - Bosch SDS Plus 14x160: https://fepy.com/product/bosch-sds-plus-drill-bit-14mm-160mm - DeWalt 14x160 SDS Plus: https://fepy.com/product/dewalt-sds-plus-drill-bit-14mm-160mm

Keep the bit clean after use to remove dust and debris, avoid overheating by drilling in short bursts if needed, and store in a dry, protected area to prevent corrosion. Regular inspection for cracks or wear can also help you replace the bit before failure.

The Makita D-00262 combines a carbide tip, durable construction, and an efficient flute design, delivering reliable performance in tough masonry tasks. When evaluating value, consider durability, cutting speed, and expected lifespan alongside price, as a higher upfront cost can translate to longer service life and lower replacement frequency in demanding jobs.

You can expect fast, clean hole creation in concrete, brick, and stone with minimal bit wear due to the carbide tip. The 160 mm length supports deep drilling, and the SDS Plus shank ensures stable operation with compatible rotary hammers, providing consistent results across professional construction tasks.