قرص القطع قليل السماكة ماكيتا (A60T)

The Makita A60T is a thin cutting wheel (about 1 mm thick) designed for precise, burr-free cuts. It’s intended for use with angle grinders and is suitable for cutting steel, fiberglass, and composites, delivering efficient, narrow cuts in tight spaces.

If you’re not satisfied, you can refer to Fepy’s returns policy on the product page for details on eligibility, timeframes, and the process to request a return.

As of now, there are no direct matching thin-cutting wheels listed on Fepy.com. You can browse for other thin or standard cutting wheels in the catalog to compare options.

The A60T is designed for standard angle grinders. Before use, verify that your grinder’s arbor size matches the wheel and that you have the appropriate guard installed. Always follow the tool manufacturer’s guidance and check for any compatibility notes on the product page.

Store in a dry, protected area away from moisture and impacts. Keep it in its original packaging or a dedicated wheel container, and avoid dropping or bending the disc to prevent damage.

The wheel uses a solid grit-to-core bond for durability and longer life. Replace it if you notice cracks, missing segments, excessive wobble, glazing, or if cut quality deteriorates significantly.

Maintain a steady, controlled feed and avoid forcing the wheel; let the wheel do the cutting. Use proper clamping and stable workholding, and minimize contact pressure to reduce burr formation.

Wear eye protection (safety glasses or a face shield), hearing protection, cut-resistant gloves, and appropriate clothing. Use a dust mask or respirator if cutting materials that produce dust, and ensure the grinder’s guard is in place.

1) Ensure the grinder is off and unplugged; 2) Inspect the wheel for cracks or damage; 3) Align and secure the wheel on the arbor with the correct direction; 4) Use the grinder guard and PPE; 5) Start at low pressure and let the wheel do the cutting; 6) Do not exceed the rated speed (up to 13,000 rpm) and avoid overheating by feeding gradually.

Ideal for metal fabrication, automotive and machinery work, electrical and piping installations, HVAC, and DIY metal-cutting tasks where precise, burr-free cuts in tight spaces are needed.

It’s designed for steel, fiberglass, and composites. The wheel’s design also supports cutting tasks like cables, and in some cases wood and plastic with careful handling, thanks to its slightly reducing angle for easier entry.

Key specs include a 1 mm cutting thickness, a maximum operating speed of up to 13,000 rpm, a resin bond, and a robust grit-to-core construction for durability and consistent cutting action.

The Makita A60T is a thin cutting wheel (about 1 mm thick) designed for precise, burr-free cuts. It’s intended for use with angle grinders and is suitable for cutting steel, fiberglass, and composites, delivering efficient, narrow cuts in tight spaces.

If you’re not satisfied, you can refer to Fepy’s returns policy on the product page for details on eligibility, timeframes, and the process to request a return.

As of now, there are no direct matching thin-cutting wheels listed on Fepy.com. You can browse for other thin or standard cutting wheels in the catalog to compare options.