ملاط مابي أديسيلكس (P10) باللون الأبيض وزن (25KG)

Mapei AdesileX P10 is a high-performance cementitious adhesive mortar designed for bonding ceramic tiles, natural stone, and similar materials to a variety of substrates. It’s suitable for both interior and exterior applications and is fast-setting and easy to apply, making it ideal for both floors and walls in wet or dry areas.

It can be used on concrete, brick, block, and cementitious renders, as well as other sound and stable substrates. For best results, ensure the surface is clean, dust-free, and free of loose material before application.

Key features include high adhesion strength, flexible bonding capability, suitability for interior and exterior use, good performance in wet/humid environments, and a fast-setting formulation that simplifies installation timelines.

Pour a portion of clean water into a mixing container, gradually add the AdesileX P10 powder, and mix with a low-speed mixer until you achieve a lump-free, creamy consistency. Let the mix rest briefly, then re-mix to uniformity. Use within the pot life indicated on the product packaging and apply with a suitable notched trowel, back-buttering large tiles if needed.

Spread the adhesive evenly with the trowel of the appropriate notch size to achieve full bed contact. For larger tiles or demanding substrates, back-buttering the tile can help ensure full contact and prevent hollow spots. Install tiles promptly and align them carefully before the adhesive begins to set.

Yes. The formulation is designed to perform well in wet areas and environments with high humidity, making it appropriate for bathrooms, kitchens, showers, and other damp zones, as well as exterior installations where weather exposure is a factor.

Wear appropriate PPE such as gloves and eye protection. Cementitious products can be alkaline and may irritate skin or eyes; ensure good ventilation and wash any contact areas with clean water. Read the safety data sheet on the product packaging for detailed guidance.

Clean tools and excess adhesive with clean water before the mortar sets. Once cured, removal may require mechanical means or special cleaners recommended by the manufacturer. Always follow local guidelines for disposal of residue.

The product is supplied in a 25 kg bag and is available in white. Coverage depends on the tile size, substrate texture, and the chosen notch trowel size; refer to the product data sheet for estimated consumption per square meter.

For quick comparisons, you can consider these available alternatives on Fepy and review their pages: Mapei Adesilex P9 (25 kg, white) at https://fepy.com/product/mapei-adesilex-p9-25kg-white and Mapei Adesilex P12 (25 kg, white) at https://fepy.com/product/mapei-adesilex-p12-25kg-white. If you’re considering a different brand, Weber tile adhesives are also listed on Fepy at https://fepy.com/product/weber-tile-adhesive-pro-25kg, allowing you to compare performance characteristics, substrate compatibility, and open times easily.

Common issues include applying too thick a layer (causing tile to sit on a ridge), insufficient substrate preparation, and tiling too soon after spreading the adhesive. To avoid these, ensure a clean, sound substrate, use the correct notch size for the tile, back-butter large formats, and follow recommended open times and curing guidance for optimal adhesion.

Yes. The product is formulated for both interior and exterior wall and floor installations, including areas exposed to moisture. Always verify the substrate and tile compatibility for your specific project and follow application guidelines accordingly.