لاصق اسمنتي مابي أديسيليكس (P9) وزن (25Kg)

Adesilex P9 has a pot life of over 8 hours, an open time of 30 minutes, and a waiting time before grouting of 4-8 hours for walls and 24 hours for floors. It sets to light foot traffic in approximately 24 hours and is ready for use in around 14 days. It is classified as EMICODE EC1 Plus, indicating very low emissions.

Adesilex P9 can be used for interior and exterior floor and wall bonding of all types of ceramic tiles and mosaics on conventional walls with cementitious renders, cementitious screeds, anhydrite screeds, gypsum walls, painted interior walls, existing terrazzo or marble floors, and suitably cured concrete structures.

The consumption rate of Adesilex P9 is 2-5 kg/m2. It is available in 25 kg bags and 4x5 kg boxes.

Mapei Adesilex P10 is a high-performance white cementitious adhesive with no vertical slip and extended open time for glass, ceramic, vitrified mosaic and tiles, and natural stone.

Mapei Adesilex P7 is a high-performance cementitious adhesive with no vertical slip for ceramic and porcelain tiles. It is used for interior and exterior bonding.

Mapei Adesilex P9 is a high‑performance cementitious adhesive designed for bonding ceramic tiles and mosaics on walls and floors. It is suitable for interior and exterior applications, provides strong adhesion, and is ready to use with water resistance and non-flammability.

It bonds well to ceramic tiles, mosaics, and natural stones on substrates such as concrete, cementitious screeds, and anhydrite. It is suitable for interior and exterior use and tolerates typical substrate movements.

Key properties include high adhesion strength, long open time, fast setting, water and frost resistance, suitability for wet areas, non-flammability, and a white cementitious powder formulation supplied in 25 kg bags.

Under typical conditions, a 25 kg bag provides coverage of about 6 m2, depending on tile size, substrate flatness, and application method.

Follow the manufacturer’s instructions: mix the white powder with clean water to form a smooth, creamy adhesive. Use a suitable notched trowel to apply the adhesive to the substrate, then comb ridges as required for tile size and type, and press tiles firmly into place to ensure full bedding.

Grouting should be performed after the adhesive has reached its initial set and achieved sufficient bond strength. Environment conditions (temperature and humidity) affect setting times, so follow the product’s guidance for your specific job site.

Yes. Adesilex P9 is water‑resistant and frost‑resistant, making it suitable for use in wet areas and exterior installations where appropriate.

Yes, it is a ready‑to‑use cementitious adhesive. It is non‑flammable and, when mixed, should be handled with standard PPE (gloves, eye protection, and a mask if dust is generated).

Yes. Adesilex P9 offers good tack and flexibility to accommodate substrate movement and rough or uneven substrates. For very uneven substrates, additional surface preparation or priming may be recommended.