لاصق أسمنتي مابي كيرابوند (T) باللون الرمادي وزن (25Kg)

Kerabond T is classified as a normal (1) slip-resistant (T) cementitious (C) adhesive of class C1T according to EN 12004. It has excellent adhesion strength, with an initial adhesion strength of 1.4 N/mm² after 28 days, and can withstand temperatures ranging from -30°C to +90°C after curing.

To prepare the adhesive, mix 100 parts of Kerabond T with approximately 24-26 parts by weight of clean water. The mixture should be stirred until a lump-free paste is achieved, with a pot life of over 8 hours at standard conditions.

Kerabond T can be used on various substrates including conventional renders, cement mortar walls, concrete slabs, and gypsum supports that have been primed. However, it should not be used on wooden substrates or metal surfaces.

The open time for Kerabond T is greater than 20 minutes under normal conditions, allowing for adjustments within approximately 45 minutes after tile placement. It is important to monitor the adhesive for skin formation during application.

Yes, mixing Kerabond T with Isolastic enhances its performance, allowing it to meet the requirements of class C2 (improved cementitious adhesive) and S2 (highly deformable adhesive). This combination is recommended for applications requiring greater flexibility.

Tiling installed with Kerabond T must not be exposed to water or freezing temperatures for at least 24 hours. It can be grouted after 4-8 hours for walls and after 24 hours for floors, while being fully ready for use after approximately 14 days.

The coverage rate varies based on tile size: approximately 2-3 kg/m² for mosaics, 4-5 kg/m² for medium tiles, and over 6 kg/m² for large tiles on floors. Spot bonding insulating materials requires about 0.5-1.5 kg/m² depending on the material used.

After your order placement, our team starts loading your order in our delivery trucks and we ensure quick delivery of your order.

We do provide offloading services, but we do not provide installation services.

Yes, we do provide equipment for fitting and maintenance. You can check out our power tools, hand tools, and hardware tool categories.

Yes, you can use MAPEI Kerabond T, Cement-Based Adhesive, 25Kg � Grey for construction purposes.