مركب تشطيب الأرضيات مابي فلور (52w/A Fst) وزن (4.7Kg)

It can be used on multiple surfaces, including tile, stone, linoleum, marble, quarry, and other similar floor types. The finish creates a mark-free, protective layer that enhances durability without damaging the underlying substrate.

Preparation is key: ensure the floor is clean, dry, and free of contaminants. Apply with a 3-inch roller using a mesh. Apply a even coat and allow it to cure for about 6 hours before light use; for higher traffic areas, a second coat can be applied after initial coat dries within the recommended recoat window. The finish will form a glossy, protective film that improves durability.

Key benefits include a high-gloss, hard-wearing surface that resists scratching and scuffing, remains clear without yellowing, and offers UV resistance. It cures rapidly, enabling faster return-to-use of the floor (about 6 hours for initial cure). It’s compatible with both resinous and non-resinous floors and comes in a 4.7 kg container.

The finish rapidly cures in about 6 hours, allowing light use. For full, heavy-traffic return, allow the coating to cure for 24 hours. Avoid soaking or exposing the surface to heavy wear until fully cured.

Use appropriate PPE such as gloves and goggles, ensure good ventilation during application, and avoid prolonged skin or eye contact. Store the container tightly closed in a cool, dry place away from heat or ignition sources and keep out of reach of children.

The product is supplied in a 4.7 kg container. Coverage depends on floor porosity, coat thickness, and application technique; for best results, follow the coating guidelines and perform a test patch to determine yield for your specific substrate and coat requirements.

It provides a durable, high-gloss finish that resists yellowing and UV discoloration, cures quickly for faster reopening of spaces, and is formulated to be compatible with both resinous and non-resinous floors. The result is a robust, long-lasting surface ideal for busy areas.

Yes. If you’re looking for variations in gloss level, cure time, or compatibility, you can explore similar finishes on Fepy from the Mapefloor line, such as Mapefloor Finish 50w/A or Mapefloor Finish 58w/A, which may offer differing performance profiles. Examples (subject to stock): https://fepy.com/product/mapefloor-finish-50wa and https://fepy.com/product/mapefloor-finish-58wa

Ideal for high-traffic indoor floors in commercial, retail, healthcare, and educational facilities where a durable, glossy finish is desired. It’s suitable over tile, stone, linoleum, marble, quarry, and similar substrates to enhance durability, ease of cleaning, and appearance.

Maintain by regular cleaning with mild, non-abrasive cleaners. Avoid harsh chemicals that could degrade the coating, and use soft cleaning methods. For heavy-duty spaces, reapplication intervals will depend on wear patterns, traffic, and cleaning practices.

Yes, the finish is formulated to resist UV-related yellowing and fading, helping maintain a glossy appearance over time even in exposure to indoor UV lighting.