مركب التسوية و الإنهاء الأرضي مابي فلور (58w/A Fst) وزن (5Kg)

Mapefloor Finish 58w/A Fst. 5Kg is a durable floor finish by MAPEI designed to seal and protect tiled and other hard-wearing floor surfaces. It provides a protective, long-lasting finish suitable for both domestic and commercial spaces.

It is intended for tiled floors and other hard-wearing substrates. Expect a fast-drying, protective seal that helps resist wear and staining in high-traffic areas, delivering a sleek, durable finish.

Prepare a clean, dry surface. Apply a thin, even coat using a short-nap roller or appropriate brush. Allow the first coat to dry per label guidance, then apply a second coat if required for the desired finish and protection.

Typically a thin first coat is applied, followed by a second coat if extra protection is needed. Drying times depend on ambient conditions; follow the guidance on the product label for best results.

Wear appropriate PPE such as gloves and eye protection, ensure good ventilation, and avoid skin contact. Follow any safety instructions printed on the product label.

The finish is designed to provide long-lasting protection for high-traffic floors, helping resist everyday wear and staining while maintaining a subtle, protective sheen.

Clean tools and rollers with water and detergent while the product is still wet. If dried, use the cleaner recommended on the product label and rinse thoroughly.

Store in a cool, dry place in a tightly closed container. Keep away from heat sources and direct sunlight. Refer to the label for any specific shelf-life guidance.

Consider these comparable options on Fepy: Mapefloor Finish 58w/A Fst. 1kg (smaller pack) at https://fepy.com/product/mapefloor-finish-58wa-fst-1kg and Mapefloor Finish 58w/A Fst. 25kg (bulk) at https://fepy.com/product/mapefloor-finish-58wa-fst-25kg. For another finish option, you can explore Sika floor finishes at https://fepy.com/product/sika-floor-finish-wk. Different pack sizes and brands offer varying coverage, gloss level, and application guidance, so choose based on space size, traffic, and desired finish.

Yes, it can be used on tiled surfaces in wet areas like bathrooms and kitchens, provided the surface is properly prepared and the product is applied according to the label instructions.

Estimate based on surface area and the coating’s coverage, which varies with surface porosity and texture. Start with the label’s guidance, plan for a second coat if needed, and round up to account for edges and waste.

It is a stand-alone floor finish intended to seal and protect tiled and hard-wearing floors. If you plan to layer with other coatings, consult the product label or contact Fepy support for compatibility guidance.

Its 5kg packaging provides a balanced amount for moderate to large tiled areas, combined with a fast-drying profile and durable protective seal. Compare pack sizes, drying times, and expected longevity with other finishes on Fepy to determine the best value for your space.