نظام تسوية البلاط بالأقماع البلاستيكية من مابي و المكون من (50Pc) قطعة

Mapei Mapelevel Easy Cap 50 Pc is a cap-based levelling system from MAPEI. The caps are pressed into the substrate to establish a consistent, level reference for cement-based slabs and self‑leveling screeds. This setup helps you achieve a smooth, flat surface with less finishing work and faster project completion.

It’s designed for cement-based slabs and self‑leveling screeds, including surfaces with self‑smoothing screeds, composite surfaces, stone aggregates, and adhesive mortar. It works indoors and outdoors, offering a reliable leveling solution across different project types.

Easy Cap provides up to six levels of levelling adjustment, allowing you to tailor thickness and flatness to different areas of your floor without additional tools.

No tools are required. Easy Caps are designed to be pushed into the substrate by hand, simplifying installation and saving time on your project. They’re intended to reduce finishing work and dust generation.

Key benefits include quick and uniform leveling, long product life, indoor and outdoor suitability, no finishing required, minimal dust, and the ability to cover a large area with a single pack.

Typical steps are: 1) prepare and clean the substrate, 2) press the Easy Caps into the areas where leveling is needed until flush with the surface, 3) spread and smooth the cement-based screed or adhesive mortar, 4) allow proper curing, After curing, the surface should be level and ready for the next layer without extra finishing.

Yes. Wear standard PPE such as gloves and eye protection when handling cement-based products. Work in a well-ventilated area and follow the substrate manufacturer’s curing times. Use the caps as intended by MAPEI to ensure safe and effective use, and avoid creating sharp edges or gaps during installation.

Compared to other levelling solutions on Fepy, Easy Cap emphasizes tool-free installation, dust reduction, and fast leveling over large areas. For alternatives, you can explore other Mapei levelling products available on Fepy, such as the 25 Pc or 75 Pc variants, which offer different pack sizes to fit project scope. Example alternative product pages (available on Fepy): https://fepy.com/product/mapei-mapelevel-easy-cap-25-pc and https://fepy.com/product/mapei-mapelevel-easy-cap-75-pc

It’s suitable for leveling floors in both new constructions and renovations, including indoor living spaces, kitchens and bathrooms, and outdoor terraces or balconies where a smooth, level surface is required before laying final flooring such as tiles or epoxy coatings.

Once installed and the screed or mortar has cured, maintain the surface as you would with other cement-based floors. Clean the area to remove excess dust during installation, and dispose of any waste according to local regulations. The caps themselves remain embedded in the bed and do not require finishing work.

If you need to return the product, review Fepy’s standard return policy for unopened or unused items within the specified return window. This ensures you can make safe decisions if the product doesn’t meet your project needs.