ملاط الأرضيات مابي بلانيبريب (4 LVT) وزن (10Kg)

It can be applied over concrete, screeds, heated screeds, ceramic tiles, quarry tiles, and most common flooring substrates to produce a flat, even base for LVT installation.

No. Planiprep 4 LVT is a pre-mixed levelling compound designed for quick and simple use, which helps speed up installation and reduce waste.

Planiprep 4 LVT dries quickly and provides fast develop times. Drying time depends on the applied thickness (between 2 and 20 mm) and the ambient conditions. It’s best to allow adequate drying before laying the LVT to ensure a solid bond.

For improved adhesion, Mapei recommends using Planitack LVT self-adhesive primer before applying Planiprep 4 LVT. Proper priming helps ensure a strong, durable bond with the LVT.

Planiprep 4 LVT can be applied in thicknesses ranging from 2 mm up to 20 mm, allowing you to level various degrees of floor unevenness before laying LVT.

Yes, it’s designed for interior use and should be handled with standard PPE. Wear gloves and eye protection, work in a well-ventilated area, and follow the Material Safety Data Sheet (MSDS) guidelines. Store in a dry place and keep out of reach of children.

Use it when preparing interior floors for LVT installations where there are minor unevenness or imperfections that need to be leveled to achieve a smooth, uniform surface suitable for adhesive application and long-term performance.

Steps: 1) Prepare and clean the substrate, removing dust and debris. 2) Check moisture and substrate suitability. 3) Apply Planitack LVT primer if recommended. 4) Place and level Planiprep 4 LVT in 2–20 mm layers as needed. 5) Allow to dry completely. 6) Proceed with LVT installation according to adhesive directions.

Planiprep 4 LVT is designed for mid-range leveling (2–20 mm) and provides a thicker leveling option, while Planiprep 3 LVT is typically used for lighter leveling needs. If you’re dealing with larger height differences, Planiprep 4 LVT may be more suitable. Alternative page: https://fepy.com/product/mapei-planiprep-3-lvt-5kg

Planiprep 4 LVT is a premixed levelling compound tailored for LVT applications with a 2–20 mm thickness range, whereas Ultraplan 1 Plus is a traditional cement-based self-levelling underlayment that usually requires mixing with water. Depending on project needs, one may be preferred for premixed speed (Planiprep) versus the standard self-levelling approach (Ultraplan). Alternative page: https://fepy.com/product/mapei-ultraplan-1-plus-25kg

Yes. Planitack LVT primer is recommended for improved adhesion before applying Planiprep. Other related items include compatible LVT adhesives and general primers suitable for LVT installations. Alternative page: https://fepy.com/product/mapei-planitack-lvt-primer-5l

You can compare and source additional Mapei levelling products such as Planiprep 3 LVT, Planiprep 5 LVT, and other self-levelling products like Ultraplan 1 Plus on Fepy. Compare options here: Planiprep 3 LVT – https://fepy.com/product/mapei-planiprep-3-lvt-5kg; Planiprep 5 LVT – https://fepy.com/product/mapei-planiprep-5-lvt-20kg; Ultraplan 1 Plus – https://fepy.com/product/mapei-ultraplan-1-plus-25kg