الغراء اللاصق مابي ألترابوند (Eco Tx 2) وزن (16Kg)

It is suitable for a variety of substrates including prepared concrete, cementitious screeds, and primed surfaces. It adheres well to ceramic, porcelain, and natural stone tiles, and can be used for floor and wall installations, including damp and wet areas.

Key features include high bond strength, extra elasticity to accommodate substrate movement, fast setting characteristics, interior and exterior use, good chemical and stain resistance, and compatibility with waterproof membranes for added protection. It is non-toxic, VOC-free, and non-flammable.

Yes. It is suitable for wet and damp areas and can be used outdoors. For enhanced protection in demanding environments, it can be applied in combination with waterproof membranes.

Follow these general steps: (1) Prepare a clean, flat, and sound substrate. (2) Optionally prime the surface as recommended. (3) Mix Ultrabond Eco Tx 2 with clean water to a creamy, lump-free consistency. (4) Apply the adhesive with an appropriate notched trowel for the tile size. (5) Back-butter large tiles if needed. (6) Allow appropriate open time and set the tiles. (7) After adhesive cure, proceed with grouting as required.

Mix Ultrabond Eco Tx 2 with clean water until you achieve a smooth, lump-free paste. Use the mixing ratio and instructions printed on the bag or provided by MAPEI for the specific batch. For large installations, use a mechanical mixer to maintain consistency.

Ultrabond Eco Tx 2 is formulated to be non-toxic and VOC-free, with non-flammable properties. It meets relevant international regulatory standards, making it a safer option for indoor and outdoor use when handled and applied as directed.

The adhesive offers long-lasting performance with strong bond resilience and resistance to chemicals and staining. Its elasticity helps accommodate movement and shrinkage, reducing the risk of tile debonding over time.

If you’re comparing options on Fepy, you can look at similar tile adhesives from MAPEI and other brands available on the site. Examples include:

Mapei Ultrabond Eco Tx 2 (16kg) – https://fepy.com/product/mapei-ultrabond-eco-tx-2-16kg

Mapei Ultrabond Eco Tx 1 (16kg) – https://fepy.com/product/mapei-ultrabond-eco-tx-1-16kg

TEC Tile Adhesive (example comparable on Fepy) – https://fepy.com/product/tec-tile-adhesive-2-16kg

Tips include ensuring a clean substrate, avoiding overly thick adhesive layers, working within the tile open time, properly back-buttering larger tiles, and allowing adequate cure before grouting. Avoid mixing with other products or adding extra water after mixing, which can compromise bond strength.

Consider bond strength, elasticity, suitability for interior/exterior use, wet area performance, compatibility with waterproofing membranes, safety (VOC-free, non-toxic), and long-term durability. While the upfront cost is important, the long-term performance and reduced maintenance can offer better value.