الجص الأسمنتي مابي الترا كولور بلاس بالترميز اللوني (114 Anthracite) وزن (4X5Kg)

It is suitable for ceramic tile, porcelain, natural stone and masonry substrates, and can be used on interior and exterior installations in wet or dry areas, including bathrooms, kitchens, and other high-traffic zones.

Pour a portion of clean water into a mixing container, gradually add the powder, and mix with a low-speed drill and paddle until a smooth, free-flowing consistency is achieved. Let the mix stand briefly, then re-stir to a uniform paste.

Use a rubber float to press the grout into the joints at a 45-degree angle, ensuring full depth. Remove excess grout from the tile surface, and then clean with a damp sponge once the grout has begun to stiffen. Allow the grout to cure before heavy use.

It offers stain resistance, strong durability, chemical resistance, and temperature tolerance. The free-flowing formula helps with uniform joint filling, and the color Anthracite provides a dark, uniform finish that hides minor staining.

In most cases, sealing is not required with Ultracolor Plus 114 due to its stain-resistant formulation. However, always follow the product’s installation guidelines and local conditions for the best long-term results.

Ultracolor Plus 114 is suitable for a wide range of joint widths, commonly from around 2 mm up to larger joints depending on tile size and substrate. Always refer to the tile manufacturer’s recommendations and the grout’s technical data for your specific installation.

Coverage depends on tile size, joint width, and surface area. Ultracolor Plus 114 is designed for good coverage and ease of use, making it suitable for both large floor installations and smaller wall applications. Plan your layout and mix enough grout to complete each section to minimize color variation.

Wear protective gloves and eye protection when handling the powder and during mixing. Work in a well-ventilated area, avoid inhaling grout dust, wash hands after handling, and keep the product out of reach of children. If skin or eye contact occurs, rinse immediately and seek medical advice if irritation persists.

This grout is well-suited for bathrooms, kitchens, commercial restrooms, shower areas, and other tiled surfaces where a durable, stain-resistant grout with a dark, uniform finish is desirable.

Ultracolor Plus 114 combines a stain-resistant, easy-to-mix formula with long-lasting durability, making it a strong option for busy residential and commercial spaces. It often offers better maintenance and cleaning ease compared with traditional cementitious grouts, especially in damp environments.

Comparable products on Fepy include other Mapei grout lines such as Keracolor S and Ultracolor Plus variants in different colors. Keracolor S is another cementitious grout option with its own finishing characteristics and sealing considerations, while Ultracolor Plus variants may offer different color ranges and performance nuances. For best results, compare color options, sealing requirements, and stain resistance details on the product pages listed on Fepy.